101
D-Link DIR-685 User Manual
Section 3 - Configuration
This page displays current status information for the DIR-685. The LAN, WAN (Internet), and Wireless information will
be displayed on this page.
If your Internet connection is set up for a Dynamic IP address then a
Release
button and a
Renew
button will be
displayed. Use
Release
to disconnect from your ISP and use
Renew
to connect to your ISP.
If your Internet connection is set up for PPPoE, a
Connect
button and a
Disconnect
button will be displayed. Use
Disconnect
to drop the PPPoE connection and use
Connect
to establish the PPPoE connection.
Displays the router’s time and firmware version.
Displays the MAC address and the public IP settings for the router.
Displays the MAC address and the private (local) IP settings for the
router.
Displays the wireless MAC address and your wireless settings such
as SSID and Channel.
Displays computers and devices that are connected to the router
via Ethernet and that are receiving an IP address assigned by the
router (DHCP).
IGMP Multicasts are subscriptions based on audio and/or video
streaming. This table displays the audio/video streams that are
currently subscribed to by users connected to the LAN side of the
router.
This table displays the rules that have been created by the users using
the UPnP protocol. Once UPnP has been enabled on the Router,
users using the UPnP protocol can create certain rules similar to
those that can be created in the Advanced menu.
General:
WAN:
LAN:
Wireless LAN:
LAN Computer:
IGMP Multicast
Memberships:
UPNP Service:
Device Info