Page 76 / 149
Scroll up to view Page 71 - 75
71
D-Link DIR-685 User Manual
Section 3 - Configuration
Guest Zone
Tick this checkbox to enable the Guest Zone feature.
Enter a wireless network name (SSID) that is different from your
main wireless network.
Select the type of security or encryption you would like to enable
for the guest zone.
Type the IP Address that the router will use for the Guest Zone
network.
Type the Subnet Mask that the router will use for the Guest Zone
network.
Tick this checkbox to prevent guest clients accessing other guest
clients in the Guest Zone. Ticking this option only allows guest clients
to access the Internet.
Tick this checkbox to allow network connectivity between the
different zones created.
Tick the
Enable DHCP Server
checkbox to configure the built-in
DHCP server to assign IP addresses to computers in the Guest
Zone.
Specify the range of IP addresses that will be assigned to computers
in the Guest Zone in the
DHCP IP Address Range
fields. Type the
last IP octet of the first host in the range in the textbox on the left
and the last IP octet of the last host in the range in the textbox on
the right.
Enable Guest Zone:
Wireless Network
Name:
Security Mode:
Router IP Address:
Default Subnet
Mask:
Enable Guest Zone
Client Isolation:
Enable Routing
Between Zones:
DHCP Server
Settings for Guest
Zone:
The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet.
These zones will be separate from your main wireless network.
Page 77 / 149
72
D-Link DIR-685 User Manual
Section 3 - Configuration
Tick the
Enable DHCP Server
checkbox to configure the built-in DHCP server to assign IP addresses to computers in
the Guest Zone.
Enter the starting and ending IP addresses that will be assigned to devices in the Guest Zone in the
DHCP IP Address
Range
fields.
Specify the length of time (in minutes) for the IP address lease in the
DHCP Lease Time
field.
Displays the Host Name, IP Address and the time the DHCP lease will expire for all the DHCP clients in the Guest
Zone.
DHCP Server Settings
for Guest Zone:
DHCP Client List for
Guest Zone:
Page 78 / 149
73
D-Link DIR-685 User Manual
Section 3 - Configuration
Wake on LAN
Tick the checkbox to enable the Wake on
LAN feature.
Type a port number to specify the UDP port
that the Magic Packet will use when trying
to turn on or wake up a computer on your
network,
Use the drop-down menu to specify the
destination interface of the Magic Packet.
Enable Wake on LAN:
UDP Port:
Interface:
The Wake on LAN feature allows computers on your network to be turned on or woken up remotely.
Page 79 / 149
74
D-Link DIR-685 User Manual
Section 3 - Configuration
Disk Management
This window displays the hard drive information
such as size, available space, used space,
and format.
Click the
Format Hard Drive
button to format
the hard drive.
Warning: When formatting your hard drive,
all data will be lost.
Tick the box to turn off the hard drive after it
has been idle for the amount of time (minutes)
specified in the
Timeout
field.
Hard Disk Drive
Information:
Format Setting:
Hard Drive
Setting:
Page 80 / 149
75
D-Link DIR-685 User Manual
Section 3 - Configuration
User / Groups
User and Group
Creation
List of All Users
Users in Group
The DIR-685 supports up to 64 unique users. The users can be added to a group, or individually. The users and groups
are created to allow access to specific folders on the DIR-685, via FTP or your local network.
This section contains required attributes for a new
user or group. Including User Name and Password
or Group name.
If creating a new user carry out the following
steps:
• Click the
User
radio button.
• Type in a
User Name
,
Password
and
Confirm
the Password in the relevant fields.
If creating a new group carry out the following
steps:
• Click the
Group Radio
button.
• Type in a
Group Name
in the
Add New Group
text box.
• Click the
Add
button to finish creating the
group
Displays the list of users that you may assign to
the selected group.
Displays the users that are members of the group
selected in the
Select Group
drop-down menu.
To add a new user to the selected group, click the
user then click the
Add >>
button.
To remove a user from the group, click the user
and then click the
<< Remove
button.
Tick the
All accounts
checkbox to select all accounts.
19216811.live