´1

D-Link DIR-660 User Manual

Section ² - Configuration

Enter a new password for the Administrator Login Name. The

administrator can make changes to the settings.

Enter the new password for the User login. If you login as

the User, you can only see the settings, but cannot change

them.

Enter a name for the DIR-660 router.

Remote management allows the DIR-660 to be configured

from the Internet by a web browser. A username and

password is still required to access the Web-Management

interface. In general, only a member of your network can

browse the built-in web pages to perform Administrator tasks.

This feature enables you to perform Administrator tasks from

the remote (Internet) host.

The port number used to access the DIR-660.

Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet

IP address of the DIR-660 and 8080 is the port used for the

Web Management interface.

This section will list any rules that are created. You may click

the

Edit

icon to change the settings or enable/disable the

rule, or click the

Delete

icon to remove the rule.

Admin Password:

User Password:

Gateway Name:

Remote

Management:

Remote Admin

Port:

Inbound Filter:

Administrator Settings

This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.

There are two accounts that can access the management interface through the web browser. The accounts are admin

and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot

make any changes. Only the admin account has the ability to change both admin and user account passwords.

Downloaded from

www.Manualslib.com

manuals search engine

´±

D-Link DIR-660 User Manual

Section ² - Configuration

Time Settings

Select the Time Zone from the drop-down

menu.

To select Daylight Saving time manually, select

enabled or disabled, and enter a start date and

an end date for daylight saving time.

NTP is short for Network Time Protocol. NTP

synchronizes computer clock times in a network

of computers. Check this box to use a NTP

server. This will only connect to a server on the

Internet, not a local server.

Enter the NTP server or select one from the

drop-down menu.

To manually input the time, enter the values

in these fields for the Year, Month, Day, Hour,

Minute, and Second and then click

Set Time

.

You can also click

Copy Your Computer’s Time

Settings

.

Time Zone:

Daylight Saving:

Enable NTP

Server:

NTP Server Used:

Manual:

The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system

clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also

be configured to automatically adjust the time when needed.

Downloaded from

www.Manualslib.com

manuals search engine

´²

D-Link DIR-660 User Manual

Section ² - Configuration

SysLog

The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs

to a SysLog server on your network.

Enable Logging to

SysLog Server:

SysLog Server IP

Address:

Check this box to send the router logs to a

SysLog Server.

The address of the SysLog server that will be

used to send the logs. You may also select

your computer from the drop-down menu (only

if receiving an IP address from the router via

DHCP).

Downloaded from

www.Manualslib.com

manuals search engine

´³

D-Link DIR-660 User Manual

Section ² - Configuration

Email Settings

The Email feature can be used to send the system log files, router alert messages, and firmware update notification

to your email address.

Enable Email

Notification:

From Email

Address:

To Email Address:

SMTP Server

Address:

Enable

Authentication:

Account Name:

Password:

On Log Full:

On Schedule:

Schedule:

When this option is enabled, router activity logs

are e-mailed to a designated email address.

This email address will appear as the sender

when you receive a log file or firmware upgrade

notification via email.

Enter the email address where you want the

email sent.

Enter the SMTP server address for sending email.

If your SMTP server requires authentication,

select this option.

Check this box if your SMTP server requires

authentication.

Enter your account for sending email.

Enter the password associated with the account.

Re-type the password associated with the

account.

When this option is selected, logs will be sent

via email when the log is full.

Selecting this option will send the logs via email

according to schedule.

This option is enabled when On Schedule is selected. You can select a schedule from the list of defined schedules. To create

a schedule, go to

Tools > Schedules

.

Downloaded from

www.Manualslib.com

manuals search engine

´´

D-Link DIR-660 User Manual

Section ² - Configuration

Use this option to save the current router

configuration settings to a file on the hard disk

of the computer you are using. First, click the

Save button. You will then see a file dialog,

where you can select a location and file name

for the settings.

Use this option to load previously saved

router configuration settings. First, use the

Browse control to find a previously save file

of configuration settings. Then, click the Load

button to transfer those settings to the router.

This option will restore all configuration settings

back to the settings that were in effect at the

time the router was shipped from the factory.

Any settings that have not been saved will be

lost, including any rules that you have created. If

you want to save the current router configuration

settings, use the Save button above.

Click to reboot the router.

Save Settings to

Local Hard Drive:

Load Settings

from Local Hard

Drive:

Restore to Factory

Default Settings:

Reboot Device:

System Settings

Downloaded from

www.Manualslib.com

manuals search engine