Page 36 / 134
Scroll up to view Page 31 - 35
32
D-Link DIR-655 User Manual
Section 3 - Configuration
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1.
Log into the web-based configuration by opening a web browser and
entering the IP address of the router (192.168.0.1). Click on
Setup
and then click
Wireless Settings
on the left side.
2.
Click on
Manual Wireless Connection Setup.
3.
Next to
Security Mode
, select
WPA-Enterprise
.
4.
Next to
WPA Mode
, select
Auto
,
WPA2 Only
, or
WPA Only
. Use
Auto
if you have wireless clients using both WPA and WPA2.
5.
Next to
Group Key Update Interval
, enter the amount of time before
the group key used for broadcast and multicast data is changed (3600
is default).
6.
Next to
Authentication Timeout
, enter the amount of time before a
client is required to re-authenticate (60 minutes is default).
7.
Next to
RADIUS Server IP Address
enter the IP Address of your RADIUS
server.
8.
Next to
RADIUS Server Port
, enter the port you are using with your RADIUS server. 1812 is the default port.
9.
Next to
RADIUS Server Shared Secret
, enter the security key.
Configure WPA-Enterprise (RADIUS)
Page 37 / 134
33
D-Link DIR-655 User Manual
Section 3 - Configuration
9.
If the
MAC Address Authentication
box is selected then the user will
need to connect from the same computer whenever logging into
the wireless network.
10. Click
Advanced
to enter settings for a secondary RADIUS Server.
11. Click
Apply Settings
to save your settings.
Page 38 / 134
34
D-Link DIR-655 User Manual
Section 3 - Configuration
From the
Setup
>
Wireless Settings
screen, click
Add Wireless Device with
WPS
.
Add Wireless Device with WPS Wizard
If you select
Manual
, a settings summary screen will appear. Write down the
security key and enter this on your wireless clients. Click
OK
to finish.
Select
Auto
to add a wireless client using WPS (Wi-Fi Protected Setup) and
then click
Next
. Skip to the next page.
Page 39 / 134
35
D-Link DIR-655 User Manual
Section 3 - Configuration
PIN:
Select this option to use PIN method. In order to use this method you
must know the wireless client’s 8 digit PIN and click
Connect
.
PBC:
Select this option to use PBC (Push Button) method to add a wireless
client. Click
Connect
.
Once you click
Connect
, you will have a 120 second time limit to apply the
settings to your wireless client(s) and successfully establish a connection.
Page 40 / 134
36
D-Link DIR-655 User Manual
Section 3 - Configuration
Network Settings
Enter the IP address of the router. The default IP address
If you change the IP address, once you click
Apply
, you
will need to enter the new IP address in your browser to
get back into the configuration utility.
Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Enter the Domain name (Optional).
Uncheck the box to transfer the DNS server information
from your ISP to your computers. If checked, your
computers will use the router for a DNS server.
IP Address:
Subnet Mask:
Local Domain:
Enable DNS Relay:
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Router Settings
19216811.live