Page 46 / 112
Scroll up to view Page 41 - 45
³6
D-Link DIR-6±8 User Manual
Section ² - Configuration
Access Control
Click the
Add.Policy
button to start the Access
Control Wizard.
Add Policy:
The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls
to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications
like P2P utilities or games.
Click
Next
to continue with the wizard.
Access Control Wizard
Page 47 / 112
³µ
D-Link DIR-6±8 User Manual
Section ² - Configuration
Enter a name for the policy and then click
Next
to continue.
Access Control Wizard (continued)
Select a schedule (I.E. Always) from the drop-down menu
and then click
Next
to continue.
Enter the following information and then click
Next
to
continue.
•
Address.Type
- Select IP address, MAC address, or
Other Machines.
•
IP.Address
- Enter the IP address of the computer
you want to apply the rule to.
Page 48 / 112
³8
D-Link DIR-6±8 User Manual
Section ² - Configuration
Select the filtering method and then click
Next
to continue.
Access Control Wizard (continued)
Enter the rule:
Enable
- Check to enable the rule.
Name
- Enter a name for your rule.
Dest.IP.Start
- Enter the starting IP address.
Dest.IP.End
- Enter the ending IP address.
Protocol
- Select the protocol.
Dest.Port.Start
- Enter the starting port number.
Dest.Port.End
- Enter the ending port number.
To enable web logging, click
Enable
.
Click
Save
to save the access control rule.
Page 49 / 112
³¶
D-Link DIR-6±8 User Manual
Section ² - Configuration
Website Filters
Add Website
Filtering Rule:
Website URL/
Domain:
Select
Allow
or
Deny
.
Enter the keywords or URLs that you want to
allow or block. Click
Save.Settings
.
Website Filters are used to allow you to set up a list of allowed Web sites that can be used by multiple users through
the network. To use this feature select to
Allow
or
Deny
, enter the domain or website and click
Save.Settings
. You
must also select
Apply.Web.Filter
under the
Access Control
section (page 45).
Page 50 / 112
´0
D-Link DIR-6±8 User Manual
Section ² - Configuration
Enter a name for the inbound filter rule.
Select
Allow
or
Deny
.
Check to enable rule.
Enter the starting IP address. Enter 0.0.0.0 if
you do not want to specify an IP range.
Enter the ending IP address. Enter
255.255.255.255 if you do not want to specify
and IP range.
Click the
Add
button to apply your settings.
You must click
Save.Settings
at the top to
save the settings.
This section will list any rules that are created.
You may click the
Edit
icon to change the
settings or enable/disable the rule, or click the
Delete
icon to remove the rule.
Name:
Action:
Enable:
Remote IP Start:
Remote IP End:
Add:
Inbound Filter
Rules List:
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you
can configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used
with Virtual Server, Port Forwarding, or Remote Administration features.
Inbound Filters
19216811.live