Page 116 / 159
Scroll up to view Page 111 - 115
DIR-620
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Advanced
In this menu you can configure advanced settings of the router:
•
create groups of ports for VLANs
•
enable the UPnP function
•
configure a DDNS service
•
add name servers
•
define static routes
•
create rules for remote access to the web-based interface
•
allow the router to use IGMP.
VLAN
On the
Advanced / VLAN
page, you can create and edit groups of ports for virtual networks
(VLANs).
By default, 2 groups are created in the router's system:
•
lan
: it includes ports 1-4 and the wireless interface (if the wireless network is splitted into
parts, the first part);
•
wan
: for the WAN interface; it includes port 5.
The
VLAN ID
parameter is not specified for both groups. Such a setting means that these groups of
ports are not assigned to any VLAN.
Figure 94. The
Advanced / VLAN
page.
To create a new group for VLAN, click the
Add
button.
!
If you want to create a group including LAN ports or the wireless network of
the router,
first delete relevant
records from the
lan
group on this page.
Page
116
of 159
Page 117 / 159
DIR-620
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Figure 95. The page for editing a group of ports for VLAN.
You can specify the following parameters:
Parameter
Description
Main settings
Name
A name for the port for easier identification.
Enable
Select the checkbox to allow using this group of ports.
Type
The type of the VLAN which identifier is specified in the
VLAN ID
field.
Local
. The group of this type is a channel used to connect local
clients to the router. It is mostly used to connect different types of
clients, which require separate connection settings.
NAT
. The group of this type is an external connection with address
translation. It is mostly used to connect to the Internet. Later the
VLAN which identifier is specified in the
VLAN ID
field is used to
create a WAN connection (on the
Net / WAN
page).
Transparent
. The group of this type is a transparent connection
between an internal port and an external connection. It is mostly
used to connect IPTV set-top boxes.
VLAN ID
An identifier of the VLAN to which this group of ports will be
assigned.
Page
117
of 159
Page 118 / 159
DIR-620
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
Parameter
Description
Ports
Port
From the list, select an available value (a physical port of the router,
the wireless interface, or, if the wireless network is splitted into
parts, a part of the wireless network) to assign it to this group. The
port will be displayed in the table at the bottom of the page.
QoS
A priority tag for the traffic transmitted through the port highlighted
in the table at the bottom of the page.
Tag
Select a value for the port highlighted in the table at the bottom of
the page:
•
tagged
,
•
untagged
.
Click the
Save changes
button.
Click the
Delete port
button to delete the port highlighted in the table at the bottom of the page.
Click the
Delete VLAN
button to delete this group of ports form the system.
!
For further use of groups of ports for VLAN it is required to save the changed settings to
the non-volatile memory of the router and reboot it (click the
Save&Reboot
line in the
top-page menu displayed when the mouse pointer is over the
System
caption).
Page
118
of 159
Page 119 / 159
DIR-620
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
UPnP
On the
Advanced / UPnP
page, you can enable the UPnP function.
UPnP is a set of networking protocols designed for automatic configuration of network devices. The
UPnP function performs automatic configuration of the device's parameters for network
applications requiring an incoming connection to the router.
Figure 96. The
Advanced / UPnP
page.
If you want to manually specify all parameters needed for network applications, deselect the
Enabled
checkbox and click the
Change
button.
If you want to enable the UPnP function in the router, select the
Enabled
checkbox, select an
interface for which the router's parameters will be automatically configured from the
Interface
drop-down list, and click the
Change
button.
Page
119
of 159
Page 120 / 159
DIR-620
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in Switch
User Manual
Configuring via Web-based Interface
DDNS
On the
Advanced / DDNS
page, you can define parameters of the DDNS service, which allows
associating a domain name with dynamic IP addresses.
Figure 97. The
Advanced / DDNS
page.
To add a new DDNS service, click the
Add
button.
Figure 98. The page for adding a DDNS service.
Page
120
of 159
19216811.live