Page 51 / 83
Scroll up to view Page 46 - 50
51
D-Link DIR-615 User Manual
Section ³ - Security
If you selected Better, the following screen will show you your
Pre-Shared Key to enter on your wireless clients.
Click
Save
to finish the Security Wizard.
If you selected Best, the following screen will show you your
Pre-Shared Key to enter on your wireless clients.
Click
Save
to finish the Security Wizard.
If you selected Good, the following screen will show you your
WEP Key to enter on your wireless clients.
Click
Save
to finish the Security Wizard.
Page 52 / 83
5±
D-Link DIR-615 User Manual
Section ³ - Security
Configure WEP
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1.
Log into the web-based configuration by opening a
web browser and entering the IP address of the router
(192.168.0.1).
Click on
Setup
and then click
Wireless
Settings
on the left side.
2. Next to
Security Mode
, select
WEP
.
3. Next to
Authentication
, select
Shared Key
or
Open
.
4. Next to
WEP Key Encryption
, select the level of ecryption
(64 or 128-bit).
5. Next to
Key Type
, select the type of WEP key (Hex or
ASCII).
6. Next to
WEP Key 1
, enter a WEP key that you create.
Make sure you enter this key exactly on all your wireless
devices. You may enter up to 4 different keys.
7. Click
Save Settings
to save your settings. If you are
configuring the router with a wireless adapter, you will
lose connectivity until you enable WEP on your adapter
and enter the same WEP key as you did on the router.
Page 53 / 83
5²
D-Link DIR-615 User Manual
Section ³ - Security
Configure WPA-Personal (PSK)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1.
Log into the web-based configuration by opening a
web browser and entering the IP address of the router
(192.168.0.1).
Click on
Setup
and then click
Wireless
Settings
on the left side.
2. Next to
Security Mode
, select
WPA-Personal
.
3. Next to
WPA Mode
, select
Auto
,
WPA2 Only
, or
WPA Only
.
Use
Auto
if you have wireless clients using both WPA and
WPA2.
4. Next to
Pre-Shared Key
, enter a key (passphrase). The key
is entered as a pass-phrase in ASCII format at both ends of
the wireless connection. The pass-phrase must be between
8-63 characters.
5. Click
Save Settings
to save your settings. If you are
configuring the router with a wireless adapter, you will lose
connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router.
Page 54 / 83
5³
D-Link DIR-615 User Manual
Section ³ - Security
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1.
Log into the web-based configuration by opening a web browser
and entering the IP address of the router (192.168.0.1).
Click on
Setup
and then click
Wireless Settings
on the left side.
2. Next to
Security Mode
, select
WPA-Enterprise
.
3. Next to
WPA Mode
, select
Auto
,
WPA2 Only
, or
WPA Only
. Use
Auto
if you have wireless clients using both WPA and WPA2.
4. Next to
Authentication Timeout
, enter the amount of time before
a client is required to re-authenticate (60 minutes is default).
5. Next to
RADIUS Server IP Address
enter the IP Address of your
RADIUS server.
6. Next to
RADIUS Server Port
, enter the port you are using with
your RADIUS server. 1812 is the default port.
7. Next to
RADIUS Server Shared Secret
, enter the security key.
8. If the
MAC Address Authentication
box is selected then the user
will need to connect from the same computer whenever logging
into the wireless network.
Configure WPA-Enterprise (RADIUS)
Page 55 / 83
55
D-Link DIR-615 User Manual
Section ³ - Security
9. Click
Advanced
to enter settings for a secondary RADIUS
Server.
10. Click
Apply Settings
to save your settings.
19216811.live