Page 21 / 93 Scroll up to view Page 16 - 20
17
D-Link DIR-605L User Manual
Section 3 - Configuration
Select
Dynamic
(most common) or
Static
. Select
Static
if your
ISP assigned you the IP address, subnet mask, gateway, and
DNS server addresses.
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in
the next box.
Enter the ISP Service Name (optional).
Enter the IP address (Static PPPoE only).
The default MAC Address is set to the WAN’s physical interface
MAC address on the Broadband Router.
You can click the
Copy.Your.PC’s.MAC.Address
button to
copy the MAC address of the Ethernet adapter installed in
your computer to the router.
Enter the Primary and Secondary DNS Server Addresses (Static
PPPoE only).
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Maximum Transmission Unit - You may need to change the MTU for optimal performance with your specific ISP.
1492
is the default MTU.
Select a schedule or click
Add.New
to create a new one. Then select either
Manual
or
Connection.on.demand
.
PPPoE:
User Name:
Password:
Service Name:
IP Address:
MAC Address:
Copy Your PC’s
MAC Address:
DNS Addresses:
Maximum Idle
Time:
MTU:
Connection Mode
Select:
PPPoE
Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a
username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your
computer. The software is no longer needed and will not work through a router.
Page 22 / 93
18
D-Link DIR-605L User Manual
Section 3 - Configuration
Select
Dynamic
(most common) or
Static
. Select
Static
if your ISP
assigned you the IP address, subnet mask, gateway, and DNS server
addresses.
Enter the IP address (Static PPTP only).
Enter the Primary and Secondary DNS Server Addresses (Static PPTP
only).
Enter the Gateway IP Address provided by your ISP.
The DNS server information will be supplied by your ISP (Internet
Service Provider.)
The default MAC Address is set to the WAN’s physical interface MAC
address on the Broadband Router.
You can click the
Copy.Your.PC’s.MAC.Address
button to copy the
MAC address of the Ethernet adapter installed in your computer to
the router.
Enter the Server IP provided by your ISP (optional).
Enter your PPTP account name.
Enter your PPTP password and then retype the password in the
Confirm Password
box.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Maximum Transmission Unit - You may need to change the MTU for
optimal performance.
Select a schedule or click
Add.New
to create a new one. Then select
either
Manual
or
Connection.on.demand
.
PPTP:
PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway:
Primary DNS:
MAC Address:
Copy Your PC’s
MAC Address:
PPTP Server IP:
User Name:
Password:
Maximum Idle
Time:
MTU:
Connection Mode
Select:
PPTP
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password.
Page 23 / 93
19
D-Link DIR-605L User Manual
Section 3 - Configuration
Select
Dynamic
(most common) or
Static
. Select
Static
if your ISP
assigned you the IP address, subnet mask, gateway, and DNS server
addresses.
Enter the IP address (Static L2TP only).
Enter the Primary and Secondary DNS Server Addresses (Static L2TP
only).
Enter the Gateway IP Address provided by your ISP.
The DNS server information will be supplied by your ISP (Internet
Service Provider.)
The default MAC Address is set to the WAN’s physical interface MAC
address on the Broadband Router.
You can click the
Copy.Your.PC’s.MAC.Address
button to copy the
MAC address of the Ethernet adapter installed in your computer to
the router.
Enter the Server IP provided by your ISP (optional).
Enter your L2TP account name.
Enter your L2TP password and then retype the password in the
Confirm Password
box.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Maximum Transmission Unit - You may need to change the MTU for
optimal performance with your specific ISP.
Select a schedule or click
Add.New
to create a new one. Then select
either
Manual
or
Connection.on.demand
.
L2TP:
L2TP IP Address:
L2TP Subnet Mask:
L2TP Gateway:
Primary DNS:
MAC Address:
Copy Your PC’s
MAC Address:
Server IP:
User Name:
Password:
Maximum Idle
Time:
MTU:
Connection Mode
Select:
L2TP
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and
password. This option is typically used for DSL services.
Page 24 / 93
20
D-Link DIR-605L User Manual
Section 3 - Configuration
Wireless Settings
If you want to configure the wireless settings on your router
using the wizard, click
Wireless.Connection.Setup.Wizard
and skip to page 23.
If you want to manually configure the wireless settings on
your router click
Manual.Wireless.Connection.Setup
and
refer to the next page.
Page 25 / 93
21
D-Link DIR-605L User Manual
Section 3 - Configuration
To enable WPS (WCN 2.0), check the Enable box. Click either
Generate.New.PIN
or
Reset.PIN.to.Default
, and then configure
the Wi-Fi settings below. Please see the Setting Up Wi-Fi
Protection (WCN 2.0 in Windows Vista®) section later in this
manual for detailed configuration information.
Check the box to enable the wireless function. If you do not
want to use wireless, uncheck the box to disable all the wireless
functions.
Service Set Identifier (SSID) is the name of your wireless
network. Create a name using up to 32 characters. The SSID is
case-sensitive.
Check this box to allow the DIR-605L to select the channel with
the least amount of interference automatically.
Indicates the wireless channel for the router. By default the
channel is set to 6. The Channel can be changed to fit the
channel setting to customize your wireless network. If you
enabled Auto Channel Selection, this option will be greyed out.
Use the drop-down menu to select the appropriate Transmission
Rate in Mbits per second. Many users will want to use the default
setting,
Best (automatic)
.
Enable Wi-Fi Multimedia to enjoy basic quality of service
features. WMM prioritizes traffic according to four access
categories: voice, video, best effort, and background.
Check this option if you would not like the SSID of your wireless
network to be broadcasted by the DIR-605L. If this option is
checked, the SSID of the DIR-605L will not be seen by Site Survey
utilities so your wireless clients will have to know the SSID of
your DIR-605L in order to connect to it.
Wi-Fi Protected
Setup:
Enable
Auto Channel:
Wireless Network
Name:
Transmission
Rate:
WMM Enable:
Enable Wireless:
Enable Hidden
Wireless:
Manual Wireless Setup
Wireless Channel:

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top