Page 46 / 93
Scroll up to view Page 41 - 45
42
D-Link DIR-600L User Manual
Section 3 - Configuration
Save and Restore
Use this option to save the current router configuration
settings to a file on the hard disk of the computer you are
using. First, click the
Save
button. You will then see a file
dialog, where you can select a location and file name for
the settings.
Use this option to load previously saved router configuration
settings. First, use the
Browse
control to find a previously
save file of configuration settings. Then, click the
Upload.
Settings
button to transfer those settings to the Router.
This option will restore all configuration settings back to
the settings that were in effect at the time the router was
shipped from the factory. Any settings that have not been
saved will be lost, including any rules that you have created.
If you want to save the current router configuration settings,
use the
Save
button above.
Click to remove all non-default language packs from the
router.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
Clear Language
Pack:
This window allows you to save your configuration file to a hard drive, load configuration settings from a hard drive, and restore
the Router’s factory default settings.
Page 47 / 93
43
D-Link DIR-600L User Manual
Section 3 - Configuration
Firmware Update
Click the
Check.Now
button (or the link at the top of
the window) to find out if there is an updated firmware;
if so, download the new firmware to your hard drive.
After you have downloaded the new firmware, click
Browse
in this window to locate the firmware update
on your hard drive. Click
Save.Settings
to complete
the firmware upgrade.
Firmware
Upgrade:
Browse:
Browse:
Browse:
You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the
computer. Click on
Browse
to locate the firmware file to be used for the update. Please check the D-Link support site for firmware
updates at
http://support±dlink±com
. You can download firmware upgrades to your hard drive from the D-Link support site.
You can change the language of the web UI by uploading available
language packs.
Language Pack
After you have downloaded the new language pack,
click
Browse
to locate the language pack file on your
hard drive. Click
Upload
to complete the language
pack upgrade.
You can change the language of the web UI by uploading available
language packs.
mydlink Pack
After you have downloaded the new mydlink pack,
click
Browse
to locate the pack file on your hard drive.
Click
Upload
to complete the mydlink pack upgrade.
Page 48 / 93
44
D-Link DIR-600L User Manual
Section 3 - Configuration
DDNS Setting
Check the
Enable.DDNS
checkbox to enable support
for DDNS.
Select one of the DDNS registration organizations form
those listed in the drop-down menu. Available servers
include
dlinkddns.com (Free), DynDns.org (Custom), Dyn.
Dns.org (free),
and
Dyn.Dns.org (Static)
.
Enter the host name of the DDNS server.
Enter the username given to you by your DDNS server.
Enter the password or key given to you by your DDNS
server.
Click this button to test the connection of your DDNS
account.
Displays the connection status of your DDNS account.
Enable DDNS:
Server Address:
Host Name:
Username:
Password:
DDNS Account
Testing:
Status:
The router supports DDNS (Dynamic Domain Name Service). The Dynamic DNS service allows a dynamic public IP address to
be associated with a static host name in any of the many domains, allowing access to a specified host from various locations on
the Internet. This is enabled to allow remote access to a host by clicking a hyperlinked URL in the form “hostname.dyndns.org”.
Many ISPs assign public IP addresses using DHCP, this can make it difficult to locate a specific host on the LAN using standard
DNS. If for example you are running a public web server or VPN server on your LAN, this ensures that the host can be located
from the Internet if the public IP address changes. DDNS requires that an account be setup with one of the supported DDNS
providers.
Page 49 / 93
45
D-Link DIR-600L User Manual
Section 3 - Configuration
System Check
VCT is an advanced feature that integrates a LAN cable
tester on every Ethernet port on the router. Through
the graphical user interface (GUI), VCT can be used
to remotely diagnose and report cable faults such as
opens, shorts, swaps, and impedance mismatch. This
feature significantly reduces service calls and returns
by allowing users to easily troubleshoot their cable
connections.
The Ping Test is used to send Ping packets to test if a
computer is on the Internet. Enter the IP Address that
you wish to Ping, and click
Ping
.
Displays the ping results.
VCT (Virtual
Cable Tester)
Info:
Ping Test:
Ping Result:
This tool is used to verify the physical connectivity on both the LAN and the WAN interfaces. The Ping Test can be used to test
the status of the Internet.
Page 50 / 93
46
D-Link DIR-600L User Manual
Section 3 - Configuration
Schedules
Enter a name for the new schedule rule.
Choose the desired day(s), either
All.Week
or
Select.Days
.
If the latter is selected, please use the check boxes directly
below to specify the individual days.
Click this check box if the new schedule rule applies to the
full 24-hour period.
If the new schedule rule does not apply to the full 24-hour
period, uncheck the previous checkbox and then enter a
specific beginning and ending time.
Displays user-created rules.
Name:
Day(s):
All Day - 24 hrs:
Start Time/
End Time:
Schedule Rules
List:
The Router allows the user the ability to manage schedule rules for various firewall and parental control features on this window.
Once you have finished configuring the new schedule rule, click the
Save Settings
button at the top.
19216811.live