Page 46 / 97
Scroll up to view Page 41 - 45
46
D-Link DIR-600 User Manual
Section 3 - Configuration
DDNS Setting
Tick the Enable DDNS checkbox to enable support
for DDNS.
Select one of the DDNS registration organizations
form those listed in the pull-down menu. Available
servers include dlinkddns.com(Free), DynDns.
org(Custom), Dyn.Dns.org(free), and Dyn.Dns.
org(Static).
Enter the host name of the DDNS server.
Enter the username given to you by your DDNS
server.
Enter the password or key given to you by your
DDNS server.
Enable DDNS:
Server
Address:
Host Name:
Username:
Password:
The router supports DDNS (Dynamic Domain Name Service). The Dynamic DNS service allows a dynamic public IP
address to be associated with a static host name in any of the many domains, allowing access to a specified host from
various locations on the Internet. This is enabled to allow remote access to a host by clicking a hyperlinked URL in the
form “hostname.dyndns.org”. Many ISPs assign public IP addresses using DHCP, this can make it difficult to locate
a specific host on the LAN using standard DNS. If for example you are running a public web server or VPN server on
your LAN, this ensures that the host can be located from the Internet if the public IP address changes. DDNS requires
that an account be setup with one of the supported DDNS providers.
Page 47 / 97
47
D-Link DIR-600 User Manual
Section 3 - Configuration
System Check
VCT is an advanced feature that integrates a
LAN cable tester on every Ethernet port on the
router. Through the graphical user interface
(GUI), VCT can be used to remotely diagnose
and report cable faults such as opens, shorts,
swaps, and impedance mismatch. This feature
significantly reduces service calls and returns by
allowing users to easily troubleshoot their cable
connections.
The Ping Test is used to send Ping packets to
test if a computer is on the Internet. Enter the IP
Address that you wish to Ping, and click
Ping
.
Virtual Cable
Tester (VCT)
Info:
Ping Test:
This tool is used to verify the physical connectivity on both the LAN and the WAN interfaces. The Ping Test can be
used to test the status of the Internet.
Page 48 / 97
48
D-Link DIR-600 User Manual
Section 3 - Configuration
Schedules
Enter a name for the new schedule rule.
Choose the desired day(s), either All Week or
Select Days. If the latter is selected, please use the
checkboxes directly below to specify the individual
days.
Tick this check box if the new schedule rule applies
to the full 24-hour period.
If the new schedule rule does not apply to the full
24-hour period, untick the previous checkbox and
then enter a specific beginning and ending time.
Name:
Day(s):
All Day - 24 hrs:
Start Time/
End Time:
The Router allows the user the ability to manage schedule rules for various firewall and parental control features on
this window. Once you have finished configuring the new schedule rule, click the
Save Settings
button at the top of
the window.
Page 49 / 97
49
D-Link DIR-600 User Manual
Section 3 - Configuration
Log Settings
Click on the
Save
button link on this window to
save the log file to your local hard drive.
click the checkbox to save the log in the log server
in the LAN side.
Click the checkbox(es) of the type of log information
requested:
“System, Firewall & Security, Router
Status, Critical, Warning and Information”
Enter the your SNTP server name(or IP address)
and enter your mail address before sending your
system log by mail.
Save Log File:
Syslog Server:
Log Type &
Level:
Send by Mail:
The system log displays chronological event log data specified by the router user. You may also save a simple text file
containing the log to your computer. Click the
Save
button and follow the prompts to save the file.
Page 50 / 97
50
D-Link DIR-600 User Manual
Section 3 - Configuration
Device Info
This window displays the current information for the DIR-600. It will display the LAN, WAN, and Wireless
information.
If your WAN connection is set up for a Dynamic IP address then a
DHCP
Release
button and a
DHCP
Renew
button
will be displayed. Use
DHCP Release
to disconnect from your ISP and use
DHCP Renew
to connect to your ISP.
If your WAN connection is set up for PPPoE, a
Connect
button and a
Disconnect
button will be displayed. Use
Disconnect
to drop the PPPoE connection and use
Connect
to establish the PPPoE connection.
Displays the MAC address and the private (local)
IP settings for the router.
Displays the MAC address and the public IP
settings for the router.
Displays the wireless MAC address and your
wireless settings such as SSID, Channel, and
Encryption status.
LAN:
WAN:
Wireless
802.11N:
19216811.live