Page 36 / 83 Scroll up to view Page 31 - 35
³²
D-L±nk DIR-451 User Manual
Sect±on ³ - Configurat±on
System Check
VCT is an advanced feature that integrates a
LAN cable tester on every Ethernet port on the
router. Through the graphical user interface
(GUI), VCT can be used to remotely diagnose
and report cable faults such as opens, shorts,
swaps, and impedance mismatch. This feature
significantly reduces service calls and returns
by allowing users to easily troubleshoot their
cable connections.
The Ping Test is used to send Ping packets to
test if a computer is on the Internet. Enter the
IP Address that you wish to Ping, and click
Ping
.
Virtual Cable
Tester (VCT) Info:
Ping Test:
Page 37 / 83
³³
D-L±nk DIR-451 User Manual
Sect±on ³ - Configurat±on
Schedules
Enter a name for your new schedule.
Select a day, a range of days, or all week to include
every day.
Check
All.Day.-.24hrs
or enter a start and end
time for your schedule.
Name:
Day(s):
Time:
Page 38 / 83
³4
D-L±nk DIR-451 User Manual
Sect±on ³ - Configurat±on
Log Settings
This option will send a copy of the router log to
the email address configured in the
Tools
>
Email.
Settings
screen. Refer to page 39.
Click to save the router logs to your hard drive.
Check
System.Activity
to enable logging.
Send Email
Now:
Save Log File
to Local Hard
Drive:
Log Type:
Page 39 / 83
³5
D-L±nk DIR-451 User Manual
Sect±on ³ - Configurat±on
Syslog
Check this box to send the router logs to a SysLog
Server.
The address of the SysLog server that will be
used to send the logs. You may also select
your computer from the drop-down menu (only
if receiving an IP address from the router via
DHCP).
Enable Logging
to Syslog
Server:
Syslog Server
IP Address:
The DIR-451 router keeps a running log of events and activities occurring on the router. You may send these logs to a
SysLog server on your network.
Page 40 / 83
³´
D-L±nk DIR-451 User Manual
Sect±on ³ - Configurat±on
Email Settings
When this option is enabled, router activity logs are
e-mailed to a designated email address.
This email address will appear as the sender
when you receive a log file or firmware upgrade
notification via email.
Enter the email address where you want the email
sent.
Enter the SMTP server address for sending email.
If your SMTP server requires authentication, select
this option.
Check this box if your SMTP server requires
authentication.
Enter your account for sending email.
Enter the password associated with the account.
Re-type the password associated with the
account.
Selecting this option will send the logs via email according to schedule.
This option is enabled when
On.Schedule
is selected. You can select a schedule from the list of defined schedules. To create
a schedule, go to
Tools
>
Schedules
.
Enable Email
Notification:
From Email
Address:
To Email
Address:
SMTP Server
Address/Name:
Enable
Authentication:
Account Name:
Password:
Confirm
Password:
On Schedule:
Schedule:
The Email feature can be used to send the system log files, router alert messages, and firmware update notification
to your email address.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top