D-Link DIR-450 Router Manual PDF (Setup & Configuration Guide)

Page 61 / 79 Scroll up to view Page 56 - 60

³1

D-Link DIR-450 User Manual

Appendix B - Networking Basics

Networking Basics

Check your IP address

After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a

DHCP server (i.e. mobile router) automatically. To verify your IP address, please follow the steps below.

Click on

Start

>

Run

. In the run box type

cmd

and click

OK

.

At the prompt, type

ipconﬁg

and press

Enter

.

This will display the IP address, subnet mask, and

the default gateway of your adapter.

If the address is 0.0.0.0, check your adapter

installation, security settings, and the settings

on your router. Some ﬁrewall software programs

may block a DHCP request on newly installed

adapters.

If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee

or administrator to verify their wireless network settings.

Page 62 / 79

³±

D-Link DIR-450 User Manual

Appendix B - Networking Basics

Statically Assign an IP address

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps

below:

Step 1

Windows

®

XP - Click on

Start

>

Control Panel

>

Network Connections

.

Windows

®

2000 - From the desktop, right-click

My Network Places

>

Properties

.

Step 2

Right-click on the

Local Area Connection

which represents your D-Link network adapter and select

Properties

.

Step 3

Highlight

Internet Protocol (TCP/IP)

and click

Properties

.

Step 4

Click

Use the following IP address

and enter an IP address that is on the same subnet as your network or the LAN

IP address on your router.

Example: If the router´s LAN IP address is 192.168.0.1, make your IP address

192.168.0.X where X is a number between 2 and 99. Make sure that the number

you choose is not in use on the network. Set Default Gateway the same as the LAN

IP address of your router (192.168.0.1).

Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The

Secondary DNS is not needed or you may enter a DNS server from your ISP.

Step 5

Click

OK

twice to save your settings.

Page 63 / 79

³²

D-Link DIR-450 User Manual

Appendix C - Technical Speciﬁcations

Technical Speciﬁcations

Standards

• IEEE 802.11g

• IEEE 802.11b

• IEEE 802.3

• IEEE 802.3u

Wireless Signal Rates*

• 54Mbps

• 48Mbps

• 36Mbps

• 24Mbps

• 18Mbps

• 12Mbps

• 11Mbps

• 9Mbps

• 6Mbps

• 5.5Mbps

• 2Mbps

• 1Mbps

Security

• WPA - Wi-Fi Protected Access (TKIP, MIC,

IV Expansion, Shared Key Authentication)

• 802.1x

• 64/128-bit WEP

Modulation Technology

Orthogonal Frequency Division Multiplexing (OFDM)

Receiver Sensitivity

• 54Mbps OFDM, 10% PER,-68dBm)

• 48Mbps OFDM, 10% PER,-68dBm)

• 36Mbps OFDM, 10% PER,-75dBm)

• 24Mbps OFDM, 10% PER,-79dBm)

• 18Mbps OFDM, 10% PER,-82dBm)

• 12Mbps OFDM, 10% PER,-84dBm)

• 11Mbps CCK,

8% PER,-82dBm)

• 9Mbps OFDM, 10% PER,-87dBm)

• 6Mbps OFDM, 10% PER,-88dBm)

• 5.5Mbps CCK, 8% PER,-85dBm)

• 2Mbps QPSK, 8% PER,-86dBm)

• 1Mbps BPSK, 8% PER,-89dBm)

VPN Pass Through/ Multi-Sessions

• PPTP

• L2TP

• IPSec

Device Management

• Web-based Internet Explorer v6 or later; Netscape

Navigator v6 or later; or other Java-enabled browsers

• DHCP Server and Client

Wireless Frequency Range

2.4GHz to 2.462GHz

Wireless Transmit Power

15dBm ± 2dBm

External Antenna Type

Single detachable reverse SMA

Advanced Firewall Features

• NAT with VPN Pass-through (Network Address

Translation)

• MAC Filtering

• URL Filtering

• Domain Blocking

• Scheduling

Page 64 / 79

³4

D-Link DIR-450 User Manual

Appendix C - Technical Speciﬁcations

Operating Temperature

32°F to 131°F ( 0°C to 55°C)

Humidity

95% maximum (non-condensing)

Safety and Emissions

FCC

LEDs

• Power

• Status

• WAN

• WLAN (Wireless Connection)

• LAN (10/100)

Dimensions

• L = 5.6 (142mm)

• W = 4.3 (109mm)

• H = 1.2 inches (31mm)

Weight

7.8 oz (0.22kg)

Warranty

1 Year

* Maximum wireless signal rate derived from IEEE Standard 802.11g speciﬁcations. Actual data throughput will vary. Network conditions and

environmental factors, including volume of network trafﬁc, building materials and construction, and network overhead, lower actual data throughput

rate. Environmental factors will adversely affect wireless signal range.

Page 65 / 79

³5

D-Link DIR-450 User Manual

Appendix D - Contacting Technical Support

Contacting Technical Support

Before you contact technical support, please have the following ready:

• Model number of the product (e.g. DIR-450)

• Hardware Revision (located on the label on the bottom of the router (e.g. rev A1))

• Serial Number (s/n number located on the label on the bottom of the router).

You can ﬁnd software updates and user documentation on the D-Link website as well as frequently asked questions

and answers to technical issues.

For customers within the United States:

Phone Support:

(877) 45-DLink

(877) 453-5465

Internet Support:

http://support.dlink.com

For customers within Canada:

Phone Support:

(800) 361-5265

Internet Support:

http://support.dlink.com

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share