Page 76 / 101
Scroll up to view Page 71 - 75
72
D-Link DIR-412 User Manual
Section 4 - Security
Enter the SSID (Service Set Identifier). The SSID is the name of
your wireless network. Create a name using up to 32 characters.
The SSID is case-sensitive.
If you would like the router to automatically assign a network
key to your network, click the
Automatically assign a network
key
radio button.
Click
Next
to continue.
Alternatively, click the
Manually assign a network key
radio
button to create your own network key.
Click
Next
to continue.
The following window appears if you selected the option to
manually create your own network key.
Type a password that you would like to use for wireless security
in the
Wireless Security Password
field.
Click
Next
to continue.
Page 77 / 101
73
D-Link DIR-412 User Manual
Section 4 - Security
The following window appears to indicate that the Wireless
Connection Setup Wizard is complete.
If you selected the option that automatically generated a
network key, the automatically generated key will display next
to the
Pre-Shared Key
field.
If you manually specified a network key, the
Wireless Security
Password
that you specified will display next to the
Pre-Shared
Key
field.
Click
Save
to finish the Security Wizard.
Page 78 / 101
74
D-Link DIR-412 User Manual
Section 4 - Security
From the
Setup
>
Wireless Settings
screen, click
Add
Wireless Device with WPS
.
Add Wireless Device with WPS Wizard
PIN:
Select this option to use PIN method. In order to use this
method you must know the wireless client’s 8 digit PIN and
click
Connect
.
PBC:
Select this option to use PBC (Push Button) method to
add a wireless client. Click
Connect
.
Select
Auto
to add a wireless client using WPS (Wi-Fi Protected
Setup). Once you select
Auto
and click
Connect
, you will have
a 120 second time limit to apply the settings to your wireless
client(s) and successfully establish a connection.
If you select
Manual
, a settings summary screen will appear.
Write down the security key and enter this on your wireless
clients.
Page 79 / 101
75
D-Link DIR-412 User Manual
Section 4 - Security
Configure WPA-Personal (PSK)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1.
Log into the web-based configuration by opening a web browser
and entering the IP address of the router (192.168.0.1). Click on
Setup
and then click
Wireless Settings
on the left side and then
click the
Manual Wireless Network Setup
button.
2. Select
Enable WPA/WPA2 Wireless Security (enhanced)
from
the
Security Mode
drop-down menu.
3. Select
Auto(TKIP/AES)
,
TKIP
, or
AES
from the
Cipher Type
drop-down menu. If you have wireless clients that use both types,
use
TKIP/AES
.
4. Select
PSK
from the
PSK / EAP
drop-down menu.
5. Enter a key (passphrase) in the
Network Key
field. The key is entered as a pass-phrase in either ASCII or HEX format.
If using ASCII format the pass-phrase must be between 8-63 characters.
If using HEX format the pass-phrase must
be 64 characters. The ASCII or HEX pass-phrase must be the same at both ends of the wireless connection.
6. Click
Save Settings
to save your settings. If you are configuring the router with a wireless adapter, you will lose
connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router.
Page 80 / 101
76
D-Link DIR-412 User Manual
Section 4 - Security
Configure WPA-Enterprise (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1.
Log into the web-based configuration by opening a web browser
and entering the IP address of the router (192.168.0.1). Click on
Setup
and then click
Wireless Settings
on the left side and then
click the
Manual Wireless Network Setup
button.
2. Select
Enable WPA/WPA2 Wireless Security (Enhanced)
from
the
Security Mode
drop-down menu.
3. Select
Auto(TKIP/AES)
,
TKIP
, or
AES
from the
Cipher Type
drop-down menu. If you have wireless clients that use both types,
use
TKIP/AES
.
4. Select
EAP
from the
PSK / EAP
drop-down menu.
5. Enter the IP Address of your RADIUS server in the
RADIUS Server IP Address
field.
6. Enter the port you are using with your RADIUS server in the
Port
field.
7. Enter the security key in the
Shared Secret
field.
8. Click
Save Settings
to save your settings. If you are configuring the router with a wireless adapter, you will lose
connectivity until you enable WPA-Enterprise (RADIUS) on your adapter and enter the same passphrase as you did
on the router.
19216811.live