D-Link DIR-320 Router Manual PDF (Setup & Configuration Guide)

Page 16 / 77 Scroll up to view Page 11 - 15

Section 3 – Configuration

D-Link DIR-320 User Manual

13

Username/Password (PPTP)

- To configure the PPTP client connection,

enter the IP and account information for the router. Your ISP will give this

information to you if you are establishing a PPTP connection to the ISP.

Click

NOTE:

The broadband device used for your Cable or ADSL network connection must support

PPTP pass-through so the VPN session can be established.

Username/Password (L2TP)

- To configure the L2TP client connection,

enter the IP and account information for the router. Your ISP will give this

information to you if you are establishing a L2TP connection to the ISP.

Click

NOTE:

The broadband device used for your Cable or ADSL network connection must support

L2TP pass-through so the VPN session can be established.

Page 17 / 77

Section 3 – Configuration

D-Link DIR-320 User Manual

14

Username/Password (Bigpond)

- BigPond Cable connections use this

Enter the account and server information, as provided to you by BigPond.

Click

Static IP Address Connection

- For Static IP Address connection types,

you must type in the

IP Address

,

Subnet Mask

,

Gateway Address

,

Primary DNS Address

and

Secondary DNS

Address

(optional). Your

ISP should provide this information to you. Click

Page 18 / 77

Section 3 – Configuration

D-Link DIR-320 User Manual

15

Russia PPTP (Dual Access)

- To configure the PPTP client connection,

enter the IP and account information for the router. Your ISP will give this

information to you if you are establishing a PPTP connection to the ISP.

Click

NOTE:

The broadband device used for your Cable or ADSL network connection must support

PPTP pass-through so the VPN session can be established.

Russia PPPoE (Dual Access)

- For PPPoE connections, select the

Address Mode

Dynamic IP or Static IP, type in the

Username

and

Password

used to identify and verify your account to the ISP. Retype the

password again and if necessary, type a

Service Name

or domain name.

For Static IP address mode, type the IP Address assigned to your

account. Your ISP should provide this IP address along with other account

information. An additional set of IP settings might be required to create a

static route to the ISP. Enter the WAN IP settings used to create this route

(as given by the ISP) and click

Page 19 / 77

Section 3 – Configuration

D-Link DIR-320 User Manual

16

When you are satisfied that the settings have been entered correctly click

on the

Connect

button to save the new configuration settings.

During the save and restart procedure, the display informs that it is

rebooting. Once the reboot is complete, begin to use the router.

Page 20 / 77

Section 3 – Configuration

D-Link DIR-320 User Manual

17

Configure Internet Connection – Manual Setup

The Internet connection can be configured manually without

using the Setup Wizard. To configure Internet connection

settings manually click on the

Manual Internet Connection

Setup

button in the Internet Connection menu.

In the new menu select the

Internet Connection

type used for

your service from the

My Internet Connection is:

pull-down

menu. Follow the instructions in the next sections according to

the type of Internet connection you want to configure.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share