Page 66 / 77
Scroll up to view Page 61 - 65
Section 3 – Configuration
D-Link DIR-320 User Manual
63
System Check
This menu is used to monitor port performance and connectivity, the menus
displayed are
VCT Info
and
Ping Test
.
VCT Info
The Virtual Cable Tester displays the current status of all ports.
Ping Test
The Ping Test section allows you to ping any IP address from the Router to
test connectivity to the address. To Ping a device, enter the IP address of the
device that you wish to ping into the
Host Name or IP Address
field and click
Ping
to start the Ping mechanism. The results of the Ping will be shown under
the
Ping Result
heading.
Page 67 / 77
Section 3 – Configuration
D-Link DIR-320 User Manual
64
Schedules
This window is used to create implementation schedules. This is the
same menu accessed using the
Make New Schedule
button in the
rules menu of various settings pages.
Schedule rule setup menu
Complete the
Add Schedule Rule
settings on the window above and
then click the
Save Settings
button at the top of the window.
NOTE:
Make sure the time in Router is synchronized with your local time
to have the schedule setting work properly.
If the router is reset or powered off, the schedule function will not work as
expected since the router time will be incorrect.
Page 68 / 77
Section 3 – Configuration
D-Link DIR-320 User Manual
65
Log Settings
The system log displays chronological event log data, including System
Activity, Debug Information, Attacks, Dropped Packets, and Notice. Check the
desired category of Log Type in the bottom half of the window above and then
click the
Save
button and follow the prompts to save the file.
Alerts can be sent to an email account. Use the Send By Mail settings to
configure Email account information. Click the
Send Me Now
button to email
alerts to a previously configured email account.
Page 69 / 77
Section 3 – Configuration
D-Link DIR-320 User Manual
66
Status
The
Status
directory menus are used to check information about the Router, including
Device Information
,
Log
,
Statistics
, and
Active Session
.
Device Information
The Device Information display is used to view information
regarding the settings of the Router, both on the LAN side and
WAN side of the connection. The firmware version is also
displayed here as well as in the firmware upgrade menu.
Page 70 / 77
Section 3 – Configuration
D-Link DIR-320 User Manual
67
Log
The Log displays events occurring within the router by time
and date, and also view the source and destination of the
event. The user may use the
First Page
,
Last Page
,
Previous
and
Next
buttons to scroll through the log events
listed in the window. To clear the log events, click
Clear
.
Click the
Link to Log Settings
button to change what events
are displayed in the log.
19216811.live