Page 66 / 104
Scroll up to view Page 61 - 65
66
D-Link DIR-300 User Manual
Section 6 - Setting Up Wi-Fi Protection (WCN 2.0 in Windows Vista)
Setting Up a Configured Router
Once the Router has been configured, you can use the push button on the Router or third party software to invite a newcomer to
join your Wi-Fi protected network. For maximum security, the software method is recommended. However, the push button method
is ideal if there is no access to a GUI.
If you are using the Router’s Wi-Fi Security push button option, simultaneously depress the push button located on the side of the
Router and the button on the client (or virtual button on the client’s GUI). Next click
Finish
. The Client’s software will then allow
a newcomer to join your secure, Wi-Fi protected network.
If you are using third party software, run the appropriate Wi-Fi Protected System utility. You will be asked to either use the push
button method or to manually enter the PIN. Follow the on-screen instructions.
Page 67 / 104
6´
D-Link DIR-300 User Manual
Section ´ - Changing the Computer Name and Joining a Workgroup
Changing the Computer Name and Joining a
Workgroup
The following are step-by-step directions to change the computer name and join a workgroup.
2.
Click on the
Advanced system settings
link.
1. Click on
Properties
.
Page 68 / 104
68
D-Link DIR-300 User Manual
Section ´ - Changing the Computer Name and Joining a Workgroup
3.
Click the
Computer Name
tab in the
System Properties
window and
enter a description of your computer in the textbox. When you are finished,
click the
Change
button.
4.
Go to the
Computer Name/Domain Changes
window and
click the radio button next to the Workgroup you want to join.
When you are finished, click the
OK
button.
Page 69 / 104
6µ
D-Link DIR-300 User Manual
Section 8 - Configuring the IP Address in Vista
Configuring the IP Address in Vista
The following are step-by-step directions to configure the IP address in Windows Vista.
2.
Go to the
Network and Internet
window and click the appropriate
Local Area Connection
icon.
1. Click on
Properties
.
3.
Right-click the
Local Area Connection
icon and then select
Properties
from the drop-down menu.
Page 70 / 104
´0
D-Link DIR-300 User Manual
Section 8 - Configuring the IP Address in Vista
4.
Tick the
Internet Protocol Version 4 (TCP/IPv4)
checkbox in the
Networking
tab in the
Local Area Connection Properties
window.
5.
Click the “Use the following IP address” option in the
General
tab in the
Local Area Connections Properties
window and enter
the desired IP address in the space offered. Then click the “Use
the following DNS server adresses” option on the same tab and
enter the desired DNS server information.
19216811.live