D-Link DIR-130 Router Manual PDF (Setup & Configuration Guide)

Page 46 / 83 Scroll up to view Page 41 - 45

³1

D-L±nk DIR-130 User Manual

Sect±on 3 - Conﬁgurat±on

Select a user group from the menu and click the

EDIT button to conﬁgure that group.

Enter a name for the user group. Click the

Clear

the list below

button to erase all of the user

names and passwords for the user group.

Enter the User Name.

Enter the Password.

Authentication

Database:

Group Name:

User Name:

Password:

User Groups

This section is used to conﬁgure Certiﬁcates that are used with an IPSec based VPN. You can conﬁgure local certiﬁcates

and the certiﬁcates of remote peers. Select one of the three options from the drop-down menu:

Local Certiﬁcate &

Private key

,

Certiﬁcate of Remote Peers

, or

Certiﬁcate Authorities

.

Page 47 / 83

³²

D-L±nk DIR-130 User Manual

Sect±on 3 - Conﬁgurat±on

Enter a new password for the administrator login.

Only the administrator can make changes to the

settings.

Remote management allows the router to be

conﬁgured from the Internet by a web browser. A

username and password is still required to access

the Web-Management interface. In general, only a

member of your network can browse the built-in web

pages to perform Administrator tasks. This feature

enables you to perform Administrator tasks from

the remote (Internet) host.

Enter the IP address of the remote computer. You

may enter

*

to allow a connection from any Internet

address.

The port number used to access the DIR-130.

Example: http://x.x.x.x:8080 whereas x.x.x.x is the

Internet

IP address of the DIR-130 and 8080 is the

port used for the Web Management interface. The

schedule may be set to

Always

, which will allow the

ﬁlter to always be enabled. You can create your own

times in the

Maintenance

>

Schedules

section.

Admin Password:

Enable Remote

Management:

IP Address:

Port:

Administrator Settings

This page will allow you to change the Administrator password. You can also enable Remote Management.

Page 48 / 83

³3

D-L±nk DIR-130 User Manual

Sect±on 3 - Conﬁgurat±on

Time and Date

Select the Time Zone from the drop-down

menu.

Check the checkbox to enable daylight savings

time.

Click this button to copy the time settings from

your computer.

Check the box to use NTP (Network Time

Protocol) server. NTP synchronizes computer

clock times in a network of computers. This will

only connect to a server on the Internet, not a

local server.

Select an NTP server from the drop-down

menu.

To manually input the time, enter the values

in these ﬁelds for the Year, Month, Day, Hour,

Minute, and Second and then click

Save

Settings

.

Time Zone:

Enable Daylight

Saving:

Sync. Your

computer’s time

settings:

Automatic

Time and Date

Conﬁguration:

NTP Server Used:

Manual:

The Time and Date page allows you to conﬁgure, update, and maintain the correct time and date on the internal system

clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also

be conﬁgure to automatically adjust the time when needed.

Page 49 / 83

³³

D-L±nk DIR-130 User Manual

Sect±on 3 - Conﬁgurat±on

Use this option to save the current router

conﬁguration settings to a ﬁle on the hard disk

of the computer you are using. First, click the

Save Conﬁguration

button. You will then see a

ﬁle dialog, where you can select a location and

ﬁle name for the settings.

Use this option to load previously saved

router conﬁguration settings. First, click the

Browse

button to ﬁnd a previously save ﬁle of

conﬁguration settings. Then, click the

Restore

Conﬁguration from File

button to transfer

those settings to the router.

This option will restore all conﬁguration settings

back to the settings that were in effect at the

time the router was shipped from the factory.

Any settings that have not been saved will be

lost, including any rules that you have created. If

you want to save the current router conﬁguration

settings, use the

Save Conﬁguration

button

above.

Click to reboot the router.

Save Settings to

Local Hard Drive:

Load Settings

from Local Hard

Drive:

Restore to Factory

Default Settings:

Reboot the

DIR-130:

System Settings

Page 50 / 83

³´

D-L±nk DIR-130 User Manual

Sect±on 3 - Conﬁgurat±on

After you have downloaded the new ﬁrmware,

click

Browse

to locate the ﬁrmware update on

your hard drive. Click

Apply

to complete the

ﬁrmware upgrade.

Browse:

Update Firmware

You can upgrade the ﬁrmware of the router here. Make sure the ﬁrmware you want to use is on the local hard drive of

the computer. Click on

Browse

to locate the ﬁrmware ﬁle to be used for the update. Please check the D-Link support

site for ﬁrmware updates at http://support.dlink.com. You can download ﬁrmware upgrades to your hard drive from the

D-Link support site.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share