Page 61 / 70
Scroll up to view Page 56 - 60
DIR-100 Ethernet Broadband Router
Statistics
The Ststistics displays shows transmiited and received packets occuring on the Router. To refresh the
window, click
Refresh
. To restart the packet count, click
Reset
.
Traffic Statistics
Active Session
Source and Destination packets passing through the Router are displayed listed by TCP/UDP type in the
Active Session display. To refresh the window, click the
Refresh
button.
Active Session display
55
Page 62 / 70
DIR-100 Ethernet Broadband Router
A
Technical Specifications
Standards
±
IEEE 802.3 10Base-T Ethernet
±
IEEE 802.3u 100Base-TX Fast Ethernet
±
IEEE 802.3 Nway Auto-Negotiation
Device Management
Web-Based – requires at least Microsoft Internet Explorer v5 or later,
Netscape Navigator v4 or later, or other Java-enabled browsers.
Media Access Control
CSMA/CD
LEDS
±
Power
±
Status
±
WAN
±
Local Network – 10/100
Operating Temperature
32*F to 104*F (0*C to 40*C)
Humidity
95% maximum (non-condensing)
Power Input
External power Supply
DC 5V, 1.2A
Dimensions
±
L = 5.83in (148mm)
±
W = 4.5in (114mm)
±
H = 1.26in (32mm)
Weight
0.51 lbs (230g)
56
Page 63 / 70
DIR-100 Ethernet Broadband Router
B
Configuring IP Settings on Your Computer
In order to configure your system to receive IP settings from the Router it must first have the TCP/IP
protocol installed. If you have an Ethernet port on your computer, it probably already has TCP/IP protocol
installed. If you are using Windows XP the TCP/IP is enabled by default for standard installations. Below is
an illustrated example of how to configure a Windows XP system to automatically obtain IP settings from
the Router. Following this example is a step-by-step description of the procedures used on the other
Windows operating systems to first check if the TCP/IP protocol has been installed; if it is not, instructions
are provided for installing it. Once the protocol has been installed you can configure the system to receive IP
settings from the Router.
For computers running non-Windows operating systems, follow the instructions for your OS that configure
the system to receive an IP address from the Router, that is, configure the system to be a DHCP client.
Note
Configure Windows XP for DHCP
Use the following steps to configure a computer running Windows XP to be a DHCP client.
1. From the
Start
menu on your desktop, go to
Control Panel.
From the
Start
menu,
go to
Control Panel
.
57
Page 64 / 70
DIR-100 Ethernet Broadband Router
2.
In the Control Panel menu, click Network and Internet Connections.
3.
In the Network and Internet Connections menu, click
Network Connections
.
Click
Network Connections.
Click
Network and Internet
Connections
.
4.
In the Network Connections menu, right-click on
Local Area Connection
, then click
Properties
.
58
Page 65 / 70
DIR-100 Ethernet Broadband Router
Right-click on the
Local Area
Connection
icon and select the
Properties
option from the pull-down
menu.
5. In the
General
tab of the
Local Area Connection Properties
menu, highlight
Internet Protocol
(TCP/IP)
under “This connection uses the following items:” by clicking on it once. Click on the
Properties
button.
Click
Properties
.
Select “Obtain an IP address automatically” by clicking once in the circle. Click the
OK
button
59
19216811.live