Page 71 / 92
Scroll up to view Page 66 - 70
71
DI-LB604 User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Because our routers use NAT (Network Address Translation), you can only open a
specific port to one computer at a time. For example: If you have 2 web servers on
your network, you cannot open port 80 to both computers. You will need to configure 1
of the web servers to use port 81. Now you can open port 80 to the first computer and
then open port 81 to the other computer.
9 What are virtual servers?
A Virtual Server is defined as a service port, and all requests to this port will be redirected
to the computer specified by the server IP. For example, if you have an FTP Server
(port 21) at 192.168.0.5, a Web server (port 80) at 192.168.0.6, and a VPN server at
192.168.0.7, then you need to specify the following virtual server mapping table:
10 How do I use
PC Anywhere
with my DI-LB604
router?
You will need to open 2 ports in the Virtual Server section of your D-Link router.
Step 1:
Open your web browser and enter the IP Address of the router
(192.168.0.1).
Step 2:
Click on
Advanced
at the top and then click
Virtual Server
on the left side.
Server Port
Server IP
Enable
21
192.168.0.5
X
80
192.168.0.6
X
1723
192.168.0.7
X
Page 72 / 92
72
DI-LB604 User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 3:
Enter the information as seen below. The
Private IP
is the IP Address of the
computer on your local network that you want to connect to.
Step 4:
The first entry will read as shown above.
Step 5:
Click
Apply
and then click
Continue
.
Step 6:
Create a second entry as shown below:
Page 73 / 92
73
DI-LB604 User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
11 How can I use
eDonkey
behind my D-Link
Router?
You must open ports on your router to allow incoming traffic while using
eDonkey.
eDonkey uses three ports (4 if using CLI):
4661 (TCP) To connect with a server
4662 (TCP) To connect with other clients
4665 (UDP) To communicate with servers other than the one you are connected to.
4663 (TCP) *Used with the command line (CLI) client when it is configured to allow
remote connections. This is the case when using a Graphical Interface (such as the
Java Interface) with the client.
Step 1:
Open your web browser and enter the IP Address of your router (192.168.0.1).
Enter username (admin) and your password (leave blank).
Step 2:
Click on
Advanced
and then click
Firewall
.
Step 7:
Click
Apply
and then click
Continue
.
Step 8:
Run
PCAnywhere
from the remote site and use the WAN IP Address of the
router, not your computer´s IP Address.
Page 74 / 92
74
DI-LB604 User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 3:
Create a new firewall rule:
Click
Enabled
. Enter a name (edonkey). Click
Allow
. Next to Source, select
WAN
under
interface. In the first box, enter an
*
. Leave the second box empty. Next to Destination,
select
LAN
under interface. Enter the IP Address of the computer you are running
eDonkey from. Leave the second box empty. Under Protocol, select
*
. In the port range
boxes, enter
4661
in the first box and then
4665
in the second box. Click
Always
or
set a schedule.
Step 4:
Click
Apply
and then
Continue
.
Page 75 / 92
75
DI-LB604 User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
12 How do I configure my router for KaZaA and
Grokster?
The following is for KaZaA, Grokster, and others using the FastTrack P2P file sharing
system.
In most cases, you do not have to configure anything on the router or on the Kazaa
software. If you are having problems, please follow steps below:
Step 1:
Enter the IP Address of your router in a web browser (192.168.0.1).
Step 2:
Enter your username (admin) and your password (blank by default).
Step 3:
Click on Advanced and then click Virtual Server.
Step 4:
Click Enabled and then enter a Name (kazaa for example).
Step 5:
Enter the IP Address of the computer you are running KaZaA from in the Private
IP box. Select TCP for the Protocol Type.
Step 6:
Enter 1214 in the Private and Public Port boxes. Click Always under schedule
or set a time range. Click Apply.
Make sure that you did not enable proxy/firewall in the KaZaA software.
19216811.live