D-Link DI-764 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

D-Link

DI-764

Page 11 / 82 Scroll up to view Page 6 - 10

Please remember that

D-Link Air

Pro

wireless devices are pre-configured to connect

together, right out of the box, with the default settings.

You will need

broadband Internet access (Cable/DSL) subscription

Consult with your Cable/DSL provider for proper installation of the modem

Connect the modem to the DI-764 multimode wireless broadband router

(

see the Quick Installation Guide included with the DI-764.

)

If you are connecting a desktop computer to your network, you can install the

D-Link AirPro DWL-A520

(or the DWL-520+)

wireless PCI adapter into an

available PCI slot.

(See the Quick Installation Guide included with the DWL-

A520 or the DWL-520+.)

If you are connecting a laptop computer to your network, install the drivers for the

wireless cardbus adapter (

D-Link

Air

Pro DWL-A650

) into a laptop computer .

(

See the Quick Installation Guide included with DWL-A650 or DWL-650+.

)

Getting Started

For a typical wireless setup at home (as shown above), please do the

following:

Page 12 / 82

Using the Configuration Menu

Whenever you want to configure your network or the DI-764, you can access the

Configuration Menu by opening the web-browser and typing in the IP Address of the

DI-764.

The DI-764 default IP Address is shown below:

Open the web browser

Type in the

IP Address

the Access Point

Type

admin

in the

User

Name

field

Leave the

Password

blank

Click

Home > Wizard

The Home>Wizard screen will appear.

Please refer to the

Quick Installation

Guide

for more information regarding the Setup Wizard.

http://192.168.0.1

Connect to 192.168.0.1

admin

Note:

if you have changed the default IP Address assigned to the DI-764, make sure to

enter the correct IP Address.

Page 13 / 82

Home > Wireless > 802.11a

Using the Configuration Menu

SSID-

Channel-

Wireless Settings-

choose 802.11a or 802.11b+.

Here, 802.11a is selected.

²default³ is the default setting.

All devices on the network must

share the same SSID.

If you change the default setting, the

SSID may be up to 32 characters long.

is the default channel for 802.11a.

All devices on the net-

work must share the same channel.

Hexadecimal

digits consist of the numbers 0-9 and the letters A-F

ASCII

(American Standard Code for Information Interchange) is a code for

representing English letters as numbers from 0-127

Apply-

click

Apply

to save the changes.

Keys 1-4-

input up to 4 WEP keys; select the one you wish to use.

Key Type-

select

HEX

ASCII

WEP Encryption-

select the level of encryption desired: 64, 128 or 152-bit

WEP-

select

Enabled

Disabled.

Disabled

is the default setting.

Turbo Mode-

select

OFF

The default setting is

OFF

If you enable Turbo mode on the DI-764, make sure to also enable Turbo

mode on all 802.11a wireless clients or a wireless connection will not be

established.

WEP

(

Wired Equivalent Privacy

) If you enable encryption on the DI-764

make sure to also enable encryption on all 802.11a wireless clients or

wireless connection will not be established.

Page 14 / 82

Using the Configuration Menu

Home > Wireless > 802.11b+

Apply-

click

Apply

to save the changes.

Keys 1-4-

input up to 4 WEP keys; select the one you wish to use.

Passphrase-

when you select Key Type:

ASCII

, you can enter a

Passphrase

for any or all of Keys 1-4

Key Type-

select

HEX

ASCII

WEP Encryption-

select the level of encryption desired: 64, 128 or 256-bit

WEP-

select

Enabled

Disabled.

Disabled

is the default setting.

Channel-

is the default channel for 802.11b+.

All devices on the net-

work must share the same channel.

SSID-

²default³ is the default setting.

All devices on the network must

share the same SSID.

The SSID may be up to 32 characters

long.

Wireless Settings-

choose 802.11a or 802.11b+.

Here, 802.11b+ is selected.

WEP

(

Wired Equivalent Privacy

) If you enable encryption on the DI-764

make sure to also enable encryption on all 802.11b wireless clients or

wireless connection will not be established.

Page 15 / 82

Using the Configuration Menu

Home > WAN > Dynamic IP Address

Dynamic

IP Address-

Host Name-

MAC Address-

Clone

MAC Address-

Apply-

Please be

sure to

remove any

existing

PPPoE client

software

installed

on your

computers.

most Cable modem users will select this option to obtain an IP

Address

automatically from their ISP (Internet Service Pro-

vider).

this is optional, but may be required by some ISPs.

The host

name is the device name of the Router.

the default MAC Address is set to the WAN±s physical interface

MAC address on the Router.

copy the MAC address of the Ethernet card installed by your

ISP, and replace the WAN MAC address with this Ethernet card

MAC address.

It is not recommended that you change the de-

fault MAC address unless required by your ISP.

click

Apply

to save the changes.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share