18

Appendix A

Console Mode

When you forget the system password or the IP address of the DI-704, you need to enter

console mode to reset them.

Before invoking the console program, be sure to find a null modem cable and use it to

connect from the DI-704’s COM port to your computer’s COM port. Then, execute a

terminal program, such as the

Hyper Terminal

of MS Windows 95. The connection

parameters should be set to

19200 8-N-1

. And, reboot the DI-704. When the M1 indicator

starts flashing regularly, you can press the “

Enter

” key of the keyboard several times, there

should be some messages and console prompt "

>

" appeares in the terminal.

In the console mode, you may reset the IP address and the system password of the DI-704.

Please remember to execute the

SR

command to save the changes you have made. For

example,

IP 192.168.123.254

PW admin

SR

Downloaded from

www.Manualslib.com

manuals search engine

19

Appendix B TCP/IP Configuration for Windows 95/98

This section describes installing the TCP/IP protocol into your personal computer.

Supposing you have successfully installed one network card on your personal computer. If

not, please refer to your network card manual. Moreover, the Section B.2 tells you how to set

TCP/IP values for working with the DI-704 correctly.

B.1 Install TCP/IP protocol into your PC

1.

Click

Start

button and choose

Settings

, then click

Control Panel

.

2.

Double click

Network

icon and select

Configuration

tab in the Network window.

3.

Click

Add

button to add network component into your PC.

4.

Double click

Protocol

to add TCP/IP protocol.

5.

Select

Microsoft

item in the

manufactures

list. Choose

TCP/IP

in the

Network

Protocols

. Click

OK

button to return to Network window.

Downloaded from

www.Manualslib.com

manuals search engine

20

6.

The TCP/IP protocol shall be listed in the Network window. Click

OK

to complete the

install procedure and restart your PC to enable the TCP/IP protocol.

B.2 Set TCP/IP protocol for working with the DI-704

1.

Click

Start

button and choose

Settings

, then click

Control Panel

.

2.

Double click

Network

icon. Select the TCP/IP line that has been associated to your

network card in the

Configuration

tab of the Network window.

3.

Click

Properties

button to set the TCP/IP protocol for the DI-704.

4.

Now, you have two setting methods:

Downloaded from

www.Manualslib.com

manuals search engine

21

A.

Get IP via DHCP server

a.

Select

Obtain an IP address automatically

in the

IP Address

tab.

b.

Don’t input any value in the

Gateway

tab.

c.

Choose

Disable DNS

in the

DNS Configuration

tab.

Downloaded from

www.Manualslib.com

manuals search engine

22

B.

Configure IP manually

a.

Select

Specify an IP address

in the

IP Address

tab. The default IP address

of the DI-704 is 192.168.123.254. So please use 192.168.123.xxx (xxx is

between 1 and 253) for

IP Address

field and 255.255.255.0 for

Subnet Mask

field.

b.

In the

Gateway

tab, add the IP address of the DI-704 (default IP is

Downloaded from

www.Manualslib.com

manuals search engine