1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DI-624v5

D-Link DI-624v5 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of D-Link DI-624v5 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 16
DI-624
Xtreme G 2.4GHz
Wireless Router
5V 3A DC Power Adapter
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DI-624.
01102003
Before You Begin
1.
If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or DSL modem with an
established Internet account from an Internet Service Provider (ISP).
2.
It’s best to use the same computer that is connected to your modem for configuring
the DI-624 Multimode Wireless Router. The DI-624 acts as a DHCP server and will
assign all the necessary IP address information on your network.
See Appendix at
the end of this Quick Installation Guide or the Manual on the CD-ROM for
setting each network adapter to automatically obtain an IP address.
Check Your Package Contents
DI-624 Xtreme G 2.4GHz Wireless Router
CD-ROM (containing Manual and Warranty)
Ethernet (Straight Through) Cable
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.
If any of the above items are missing, please contact your reseller.
This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.
Page 2 / 16
Connecting The DI-624 Wireless
Router To Your Network
A.
First, connect the power adapter to the
receptor
at the back panel of
the DI-624 and then plug the other end of the power adapter to a wall
outlet or power strip. The Power LED will turn
ON
to indicate proper
operation.
B.
Insert one end of an Ethernet cable to the
WAN port
on the back panel
of the
DI-624 and the other end to the Ethernet port located on your
Cable or DSL modem. The WAN LED light will illuminate to indicate
proper connection.
C.
Insert an Ethernet cable to
LAN port 1
on the back panel of the
DI-624
and an available Ethernet port on the network adapter in the computer
you will use to configure the DI-624. The LED light for LAN Port 1 will
illuminate to indicate proper connection. (Note: The WAN Port and LAN
Ports on the DI-624 are Auto-MDI/MDIX.
Meaning you can use a
straight-through or crossover-cable to the WAN Port and LAN Ports.
D.
Computers equipped with 802.11b wireless adapters will be able to
connect to the DI-624. The DWL-G650 AirExtreme Wireless Cardbus
Adapter and the DWL-G520 AirExtreme Wireless PCI Adapter will be
able to connect out of the box with the router using their default
wireless settings.
A.
Receptor for
Power Adapter
.
B.
WAN PORT
This is for the connection
of an Ethernet cable to
the Cable or DSL modem
D.
Antennas
Used to
wirelessly
connect to
802.11b
adapters.
C.
LAN PORTS
These are the
connections for
Ethernet cables to
Ethernet enabled
computers.
Reset Button
Pressing this button restores
the Router to its original factory
default settings.
Page 3 / 16
Restart Your Computer
Connecting Additional Computers To
The DI-624
Using additional Ethernet (CAT5 UTP) cables, connect your
Ethernet-equipped computers to the remaining Ethernet LAN ports
on the back panel of the DI-624.
M1 LED
– a solid
light indicates
that the DI-624 is
ready.
M2 LED
– A
solid light indicates
that the unit is defective.
WLAN LED
– a solid
light indicates that the
wireless segment is
ready.
This LED blinks
during wireless data
transmission.
WAN LED
– a
solid light indicates
connection on the
WAN port.
This
LED blinks during
data transmission.
LOCAL NETWORK
LEDs
– a solid light
on the port indicates a
connection to an
Ethernet enabled
computer on ports 1-4.
This LED blinks during
data transmission.
POWER LED
– a solid
light indicates a proper
connection to the
power supply.
Page 4 / 16
When you have completed the steps in this
Quick Installation
Guide,
your connected network should look similar to this:
Using The Setup Wizard
The logon pop-up screen will appear.
Open your Web browser
and
type
into the
URL address box. Then press the
Enter
or
Return
key.
Type
“admin”
for the username and
leave the password field blank.
Click
OK
Page 5 / 16
The Setup Wizard (continued)
Once you have logged in, the
Home
screen will appear.
You will see the following screens
Set up your new password
.
You have the option to
establish a password.
Click
Run Wizard
Click
Next
Click
Next

Rate

4 / 5 based on 1 vote.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top