Page 91 / 106
Scroll up to view Page 86 - 90
91
DI-624S User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
How do I use
PC Anywhere
with my DI-624S router? (continued)
Step 6
Create a second entry as shown here:
Step 7
Click
Apply
and then click
Continue
.
Step 8
Create a third and final entry as shown here:
Step 9
Click
Apply
and then
click
Continue
.
Step 10
Run
PCAnywhere
from the remote site and use the WAN IP Address of the router, not your
computer´s IP Address.
Page 92 / 106
92
DI-624S User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
How can I use
eDonkey
behind my D-Link Router?
Step 4
Click
Apply
and then
Continue
.
You must open ports on your router to allow incoming traffic while using
eDonkey.
eDonkey uses three ports (4 if using CLI):
4661 (TCP) To connect with a server
4662 (TCP) To connect with other clients
4665 (UDP) To communicate with servers other than the one you are connected to. 4663
(TCP) *Used with the command line (CLI) client when it is configured to allow remote
connections. This is the case when using a Graphical Interface (such as the Java Interface)
with the client.
Step 1
Open your web browser and enter the IP Address of your router (192.168.0.1).
Enter username (admin) and your password (leave blank).
Step 2
Click on
Advanced
and then click
Firewall
.
Step 3
Create a new firewall
rule:
Click
Enabled
.
Enter a name (edonkey).
Click
Allow
.
Next to Source, select
WAN
under interface. In the first
box, enter an
*
. Leave the
second box empty.
Next to Destination, select
LAN
under interface. Enter
the IP Address of the
computer you are running
eDonkey from. Leave the
second box empty. Under
Protocol, select
*
. In the port
range boxes, enter
4661
in
the first box and then
4665
in
the second box. Click
Always
or set a schedule.
Page 93 / 106
93
DI-624S User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 6
Click on the
Tools
tab and then
Misc
on the left side.
Step 7
Make sure
Gaming Mode
is Enabled. If not, click
Enabled
. Click
Apply
and then
Continue
.
How do I set up my router for SOCOM on my Playstation 2?
To allow you to play SOCOM and hear audio, you must download the latest
firmware for the router (if needed), enable Game Mode, and open port 6869 to the
IP Address of your Playstation.
Step 1
Upgrade firmware (follow link above).
Step 2
Open your web browser and enter the IP Address of the router (192.168.0.1). Enter
username (admin) and your password (blank by default).
Step 3
Click on the
Advanced
tab and then click on
Virtual Server
on the left side.
Step 4
You will now create a new Virtual Server entry. Click
Enabled
and enter a name (socom).
Enter the IP Address of your Playstation for
Private IP
.
Step 5
For
Protocol Type
select Both. Enter
6869
for both the
Private Port
and
Public Port
. Click
Always
. Click
Apply
to save changes and then
Continue
.
Page 94 / 106
94
DI-624S User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
How can I use Gamespy behind my D-Link router?
Step 1
Open your web browser and enter the IP Address of the router (192.168.0.1). Enter
admin for the username and your password (blank by default).
Step 2
Click on the Advanced tab and then click Virtual Server on the left side.
Step 3
You will create 2 entries.
Step 4
Click Enabled and enter
Settings:
Click
Apply
and then
continue
.
Step 5
Click Enabled and enter 2nd
entry:
Click
Apply
and then
continue
.
NAME
- Gamespy1
PRIVATE IP
- The IP Address
of your computer that you are
running Gamespy from.
PROTOCOL TYPE
- Both
PRIVATE PORT
- 3783
PUBLIC PORT
- 3783
SCHEDULE
- Always.
NAME - Gamespy2
PRIVATE IP - The IP Address
of your computer that you
are running Gamespy from.
PROTOCOL TYPE - Both
PRIVATE PORT - 6500
PUBLIC PORT - 6500
SCHEDULE - Always.
Page 95 / 106
95
DI-624S User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
How do I configure my router for KaZaA and Grokster?
The following is for KaZaA, Grokster, and others using the FastTrack P2P file sharing system.
In most cases, you do not have to configure anything on the router or on the KazaA software. If you
are having problems, please follow steps below:
Step 1
Enter the IP Address of your router in a web browser (192.168.0.1).
Step 2
Enter your username (admin) and your password (blank by default).
Step 3
Click on Advanced and then click Virtual Server.
Step 4
Click Enabled and then enter a Name (KaZaA for example).
Step 5
Enter the IP Address of the computer you are running KaZaA from in the Private IP box.
Select TCP for the Protocol Type.
Step 6
Enter 1214 in the Private and Public Port boxes. Click Always under schedule or set a time
range. Click Apply.
Make sure that you did not enable proxy/firewall in the KaZaA software.
19216811.live