Page 61 / 106
Scroll up to view Page 56 - 60
61
DI-624S User’s Manual
D-Link Systems, Inc.
Network Basics
Assigning a Static IP Address in Windows XP/2000
Double-click on
Network Connections
Double-click on
Properties
Right-click on
Local Area Connections
Page 62 / 106
62
DI-624S User’s Manual
D-Link Systems, Inc.
Network Basics
Input your
IP address and subnet mask.
(The IP Addresses on your network must
be within the same range. For example,
if one computer has an IP Address of
192.168.0.2, the other computers should
have IP Addresses that are sequential, like
192.168.0.3 and 192.168.0.4. The subnet
mask must be the same for all the computers
on the network.)
Assigning a Static IP Address in Windows XP/2000
Input your
DNS server addresses. (Note:
If you are entering a DNS server, you
must enter the IP Address of the Default
Gateway.)
The DNS server information will be supplied by your
ISP (Internet Service Provider.)
Click
OK
Click on
Internet Protocol (TCP/IP)
Click
Properties
Page 63 / 106
63
DI-624S User’s Manual
D-Link Systems, Inc.
Network Basics
Assigning a Static IP Address with Macintosh OSX
Go to the
Apple Menu
and select
System Preferences
c
Click on
Network
Select
Built-in Ethernet
in the
Show
pull-down
menu
Select
Manually
in the
Configure
pull-down
menu
Input the
Static IP Address
, the
Subnet Mask
and the
Router IP Address
in the appropriate
fields
Click
Apply Now
Page 64 / 106
64
DI-624S User’s Manual
D-Link Systems, Inc.
Network Basics
Selecting a Dynamic IP Address with Macintosh OSX
Go to the
Apple Menu
and select
System Preferences
Click on
Network
Select
Built-in Ethernet
in the
Show
pull-down menu
Select
Using DHCP
in the
Configure
pull-down menu
Click
Apply Now
The
IP Address, Subnet
mask
, and the
Router’s IP
Address
will appear in a few
seconds
Page 65 / 106
65
DI-624S User’s Manual
D-Link Systems, Inc.
Network Basics
Checking the Wireless Connection by Pinging in Windows XP and 2000
Go to
Start
>
Run
> type
cmd
.
A window similar to this one will appear.
Type
ping xxx.
xxx.xxx.xxx
, where
xxx
is the
IP Address
of the Wireless Router or Access Point.
A good
wireless connection will show four replies from the Wireless Router or Acess Point, as
shown.
.