Page 76 / 104
Scroll up to view Page 71 - 75
76
DI-624M User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 3:
Enter the information as seen below. The
Private IP
is the IP Address of the
computer on your local network that you want to connect to.
Step 4:
The first entry will read as shown above.
Step 5:
Click
Apply
and then click
Continue
.
Step 6:
Create a second entry as shown below:
Page 77 / 104
77
DI-624M User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 7:
Click
Apply
and then click
Continue
.
Step 8:
Create a third and final entry as shown below:
Step 9:
Click
Apply
and then click
Continue
.
Step 10:
Run
PCAnywhere
from the remote site and use the WAN IP Address of the
router, not your computer´s IP Address.
11 Ho
w can I use
eDonke
y
behind m
y D-Link Router?
You must open ports on your router to allow incoming traffic while using
eDonkey.
eDonkey uses three ports (4 if using CLI):
4661 (TCP) To connect with a server
4662 (TCP) To connect with other clients
4665 (UDP) To communicate with servers other than the one you are connected to.
4663 (TCP) *Used with the command line (CLI) client when it is configured to allow
remote connections. This is the case when using a Graphical Interface (such as the
Java Interface) with the client.
Step 1:
Open your web browser and enter the IP Address of your router (192.168.0.1).
Enter username (admin) and your password (leave blank).
Page 78 / 104
78
DI-624M User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 2:
Click on
Advanced
and then click
Firewall
.
Step 3:
Create a new firewall rule:
Click
Enabled
. Enter a name (edonkey). Click
Allow
. Next to Source, select
WAN
under
interface. In the first box, enter an
*
. Leave the second box empty. Next to Destination,
select
LAN
under interface. Enter the IP Address of the computer you are running
eDonkey from. Leave the second box empty. Under Protocol, select
*
. In the port range
boxes, enter
4661
in the first box and then
4665
in the second box. Click
Always
or set
a schedule.
Step 4:
Click
Apply
and then
Continue
.
12 Ho
w do I set up m
y r
outer f
or SOCOM on m
y
Playstation 2?
To allow you to play SOCOM and hear audio, you must download the latest firmware for
the router (if needed), enable Game Mode, and open port 6869 to the IP Address of
your Playstation.
Step 1:
Upgrade firmware (follow link above).
Page 79 / 104
79
DI-624M User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 2:
Open your web browser and enter the IP Address of the router (192.168.0.1).
Enter username (admin) and your password (blank by default).
Step 3:
Click on the
Advanced
tab and then click on
Virtual Server
on the left side.
socom
192.168.0.100
Both
6869
6869
Step 4:
You will now create a new Virtual Server entry. Click
Enabled
and enter a name
(socom). Enter the IP Address of your Playstation for
Private IP
.
Step 5:
For
Protocol Type
select Both. Enter
6869
for both the
Private Port
and
Public
Port
. Click
Always
. Click
Apply
to save changes and then
Continue
.
Step 6:
Click on the
Tools
tab and then
Misc
on the left side.
Step 7:
Make sure
Gaming Mode
is Enabled. If not, click
Enabled
. Click
Apply
and
then
Continue
.
13 Ho
w can I use Gamesp
y behind m
y D-Link r
outer?
Step 1:
Open your web browser and enter the IP Address of the router (192.168.0.1).
Enter admin for the username and your password (blank by default).
Page 80 / 104
80
DI-624M User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 3:
You will create 2 entries.
Step 4:
Click Enabled and enter Settings:
NAME
- Gamespy1
PRIVATE IP
- The IP Address of your computer that you are running Gamespy from.
PROTOCOL TYPE
- Both
PRIVATE PORT
- 3783
PUBLIC PORT
- 3783
SCHEDULE
- Always.
Click
Apply
and then
continue
.
.
Step 2:
Click on the Advanced tab and then click Virtual Server on the left side.
Both
192.168.0.100
gamespy1
3783
3783
19216811.live