Page 6 / 12
Scroll up to view Page 1 - 5
6
If you selected
Dynamic IP
Address
, this screen will appear:
(Used mainly for Cable Internet
service.)
Click
the
“
Clone MAC Address”
button to automatically copy the
MAC address of the network
adapter in your computer. You can
also manually type in the MAC
address.
The Setup Wizard (continued)
Select your Internet Connection.
You will be prompted to select the
type of Internet connection for your
router.
If you are unsure of which setting
to select, please contact your
Internet Service Provider.
Click
Next
Click
Next
This setup should be done on
the computer that is registered
on the ISP’s network.
Please continue to
Wireless Setup.
A this point, the setup wizard will try
to auto-detect your Internet connec-
tion type.
If you have a Dynamic or
PPPoE connection, you will be
brought to the corresponding page.
Otherwise, you will see the following screen:
Page 7 / 12
7
The Setup Wizard (continued)
If your ISP requires a
Static IP
Address
, and this option is
selected, then this screen will
appear:
Enter the IP address information
originally provided to you by your
ISP. You will need to complete all
the required fields.
Click
Next
Please continue to
Wireless Setup.
If your ISP uses
PPPoE
(Point-to-
Point Protocol over Ethernet), and
this option is selected, then this
screen will appear: (Used mainly for
DSL Internet service.)
Please be sure to remove any
existing PPPoE client software
installed on your computers.
Enter in the username and pass-
word provided to you by your ISP.
Click
Next
Please continue to
Wireless Setup.
Page 8 / 12
8
If you wish to use encryption for
your 802.11g network, the DI-524 is
capable of two levels of wireless
encryption - 64-bit and 128-bit.
By
default the encryption is dis-
abled.
You can change the encryp-
tion settings for more secure
wireless communication.
The Setup Wizard (continued)
The default wireless settings for
your 802.11g wireless network are:
SSID =
default
Channel =
6
You can change these settings to
match an existing wireless network.
Click
Next
Wireless Setup
Click
Next
Page 9 / 12
9
Your Setup is Complete!
Click
Restart
Click
Close
Test Internet Connection
You will be returned to the
Home
tab.
For additional settings or information,
refer to the
Advanced, Tools,
or
Status
tabs
on the web-management
interface; or to the Manual located on
the CD.
Then
relaunch
your Web browser
(i.e.,
Internet Explorer
or
Netscape
Navigator
), to link to your favorite Web
site to test your Internet connection.
Click
to
Exit
Page 10 / 12
10
To connect to the network, make sure the
network adapter in your computer is configured
properly. Here’s how to configure the network
adapter to obtain an IP address automatically
for the DI-524 Wireless Broadband Router.
APPENDIX
Restart
your computer
(if necessary)
Click
OK
Select
Obtain an IP address
automatically
Click
Internet Protocol (TCP/IP)
Click
Properties
For
Microsoft Windows XP:
Go to
Start
>
right click
on
My Network Places
>
select
Properties
>
Right click
on the
Network Connection
associated with the
Ethernet adapter and select
Properties
(i.e., D-Link DFE-530TX+).
19216811.live