Page 21 / 74 Scroll up to view Page 16 - 20
21
D-Link DHP-W306AV User Manual
Section 3 - Configuration
Click
Save
to save your network settings.
In order for your network settings to take effect the
AP will reboot automatically.
When the device has finished rebooting the main
screen will be displayed.
Select
Auto
as the configuration method only if your
wireless device supports Wi-Fi Protected Setup
(WPS). For
Manual
setup, skip to the next page.
Click
Next
to continue.
Page 22 / 74
22
D-Link DHP-W306AV User Manual
Section 3 - Configuration
Select
Manual
as the configuration method to set
up your network manually.
Click
Next
to continue.
Enter a name for your wireless network (SSID).
Select
Automatically assign a network key
to
have the access point generate a key for you to
enter on your wireless clients. If you would like
to enter your own key, select
Manually assign a
network key
.
To use WPA security, check the
use WPA
encryption instead of WEP box
. If left unchecked,
WEP encryption will be used.
Click
Next
to continue.
If you selected
Manually assign a network key
as
the configuration method, enter your network key.
This key must be entered on your wireless clients.
For
WEP
encryption, enter a Network Key exactly 5
or 13 characters long or exactly 10 or 26 characters
using 0-9 and A-F.
Click
Next
to continue.
Page 23 / 74
23
D-Link DHP-W306AV User Manual
Section 3 - Configuration
The following screen will display you the network key
to enter on your wireless clients.
Click
Save
to finish the Setup Wizard.
Page 24 / 74
24
D-Link DHP-W306AV User Manual
Section 3 - Configuration
This Wizard is designed to assist you with your wireless network setup. It will guide you through step-by-step instructions
on how to set up your wireless network and how to make it secure.
Adding a Wireless Device Using the PIN Method
Select
PIN
to use your PIN number from your
wireless device to connect to your network.
Click
Connect
to continue.
Start
WPS
on the wireless device you are adding to
you wireless network to complete the setup.
Add Wireless Device with WPS
Page 25 / 74
25
D-Link DHP-W306AV User Manual
Section 3 - Configuration
Press the
WPS Button
on the wireless device that
you are adding to your network to complete the
setup.
Adding a Wireless Device Using the PBC Method
Select
PBC
to use Push Button Configuration in
order to connect to your network.
Click
Connect
to continue.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top