Page 56 / 74
Scroll up to view Page 51 - 55
56
D-Link DHP-W306AV User Manual
Section 5 - Connecting to a Wireless Network
Click
Connect Anyway
to continue.
The utility will display the following window to indicate a
connection is being made.
The final window indicates the establishment of a successful
connection.
The next two pages display the windows used to connect to
either a WEP or a WPA-PSK wireless network.
Page 57 / 74
57
D-Link DHP-W306AV User Manual
Section 5 - Connecting to a Wireless Network
Click on a network (displayed using the SSID) using WEP under
Select a network to connect to and then click the
Connect
button.
Enter the appropriate security key or passphrase in the field
provided and then click the
Connect
button.
Configure WEP
It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter.
If you are joining an existing network, you will need to know the WEP key being used.
Page 58 / 74
58
D-Link DHP-W306AV User Manual
Section 5 - Connecting to a Wireless Network
Click on a network (displayed using the SSID) using WPA-PSK
under Select a network to connect to and then click the
Connect
button.
Enter the appropriate security key or passphrase in the field
provided and then click the
Connect
button.
Configure WPA-PSK
It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter.
If you are joining an existing network, you will need to know the WEP key being used.
Page 59 / 74
59
D-Link DHP-W306AV User Manual
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows
®
XP
Windows
®
XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for
Service Pack 2 users.
If you are using another company’s utility or Windows
®
2000, please refer to the user manual
of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option
similar to the Windows
®
XP utility as seen below.
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select
View Available
Wireless Networks
.
If you receive the
Wireless Networks Detected
bubble, click
on the center of the bubble to access the utility.
or
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) and click
the
Connect
button.
If you get a good signal, but cannot access the Internet, check
you TCP/IP settings for your wireless adapter. Refer to the
Networking Basics
section in this manual for more information.
Page 60 / 74
60
D-Link DHP-W306AV User Manual
Section 5 - Connecting to a Wireless Network
Configure WEP
It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter.
If you are joining an existing network, you will need to know the WEP key being used.
2. Highlight the wireless network (SSID) you would like to
connect to and click
Connect.
1. Open the Windows
®
XP Wireless Utility by right-clicking
on the wireless computer icon in your system tray
(lower-right corner of screen). Select
View Available
Wireless Networks.
19216811.live