xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
464
debug stp show flag
Purpose
Used to show the per-port STP debug level.
Syntax
debug stp show flag {ports <portlist>}
Description
This command used to display the STP debug level on specified ports.
Parameters
ports <portlist>
- Specifies the STP ports to display
If no parameter is specified, all ports on the switch will be displayed.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To display the debug STP levels on all ports:
DGS-3627:admin# debug stp show flag
Command: debug stp show flag
Global State: Enabled
Port Index Event flag BPDU Flag State Machine Flag
---------- ---------- --------- ------------------
1
Detail
Brief
Disable
2
Detail
Brief
Disable
3
Detail
Brief
Disable
4
Detail
Brief
Disable
5
Detail
Brief
Disable
6
Detail
Brief
Disable
7
Detail
Brief
Disable
8
Detail
Brief
Disable
9
Detail
Brief
Disable
10
Detail
Brief
Disable
11
Detail
Brief
Disable
12
Detail
Brief
Disable
Success.
DGS-3627:admin#
debug stp show counter
Purpose
Used to show the STP counters.
Syntax
debug stp show counter { ports [ < portlist > | all ] }
Description
This command used to display the STP counters.
Parameters
ports <portlist>
- Specifies the STP ports for display..
all
- Display all port’s counters
If no parameter is specified, display the global counters.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To show the STP counters for port 9:
19216811.live