1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DGS-3612
    5. /
  5. 147
Page 731 / 757 Scroll up to view Page 726 - 730
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
727
show vlan_trunk
Description
Show the VLAN trunk information.
Parameters
None.
Restrictions
None.
Example usage:
To show the VLAN Trunk information:
DGS-3627:admin# show vlan_trunk
Command: show vlan_trunk
VLAN Trunk State
:Enabled
VLAN Trunk Member Ports
:1-5,7
DGS-3627:admin#
Page 732 / 757
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
728
104
VRRP DEBUG COMMANDS
The VRRP Debug commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command
Parameters
debug vrrp show flag
debug vrrp vr_state_change state
[enable | disable]
debug vrrp packet
[all | {receiving | sending}(1)] state [enable | disable]
debug vrrp mac_addr_update state
[enable | disable]
debug vrrp interface_change state
[enable | disable]
debug vrrp timers state
[enable | disable]
debug vrrp show counter
debug vrrp clear counter
debug vrrp log state
[enable | disable]
debug vrrp show log state
debug vrrp state
[enable | disable]
Each command is listed, in detail, in the following sections.
debug vrrp show flag
Purpose
Used to display VRRP debug flag settings.
Syntax
debug vrrp show flag
Description
This command is used to display VRRP debug flag settings.
Parameters
None.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To display VRRP debug flag settings:
DGS-3627:admin# debug vrrp show flag
Command: debug vrrp show flag
Current VRRP Debug Level Settings
Virtual Router State Change
Packet Sending
DGS-3627:admin#
Page 733 / 757
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
729
debug vrrp vr_state_change
Purpose
Used to enable or disable the VRRP debug flag for VR state change.
Syntax
debug vrrp vr_state_change state [enable | disable]
Description
This command is used to enable or disable the VRRP debug flag for VR state change.
Parameters
state
- The state of the VRRP change debug flags. The default setting is disabled.
enable
- Enable the VRRP state change debug flags.
disable
- Disable the VRRP state change debug flags.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To enable the VRRP virtual router state change debug flag:
DGS-3627:admin# debug vrrp vr_state_change state enable
Command: debug vrrp vr_state_change state enable
Success.
DGS-3627:admin#
debug vrrp packet
Purpose
Used to enable or disable VRRP debug flags about packet receiving and sending.
Syntax
debug vrrp packet [all | {receiving | sending}(1)] state [enable | disable]
Description
This command is used to enable or disable VRRP debug flags for packet receiving and
sending.
Parameters
all
- Set VRRP all packet debug flags.
receiving
- Set the VRRP packet receiving flag.
sending
- Set the VRRP packet sending flag.
enable
- Enable the designated flags.
disable
- Disable the designated flags.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To enable all VRRP packet debug flags:
DGS-3627:admin# debug vrrp packet all state enable
Command: debug vrrp packet all state enable
Success.
DGS-3627:admin#
debug vrrp mac_addr_update
Purpose
Used to enable or disable VRRP debug flags for virtual MAC address operations.
Syntax
debug vrrp mac_addr_update state [enable | disable]
Description
This command is used to enable or disable VRRP debug flags for virtual MAC address
operations.
Page 734 / 757
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
730
debug vrrp mac_addr_update
Parameters
state
- The state of VRRP MAC debug flags. The default setting is disabled.
enable
- Enable VRRP MAC debug flags.
disable
- Disable VRRP MAC debug flags.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To enable VRRP virtual MAC address update debug flags:
DGS-3627:admin# debug vrrp mac_addr_update state enable
Command: debug vrrp mac_addr_update state enable
Success.
DGS-3627:admin#
debug vrrp interface_change
Purpose
Used to enable or disable debug flags for VRRP interface state changes.
Syntax
debug vrrp interface_change state [enable | disable]
Description
The command is used to enable or disable debug flags for VRRP interface state changes.
Parameters
state
- The state of VRRP interface debug flags. The default setting is disabled.
enable
- Enable VRRP interface debug flags.
disable
- Disable VRRP interface debug flags.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To enable VRRP interface state change debug flags:
DGS-3627:admin# debug vrrp interface_change state enable
Command: debug vrrp interface_change state enable
Success.
DGS-3627:admin#
debug vrrp timers
Purpose
Used to enable or disable debug flags for VRRP timers.
Syntax
debug vrrp timers state [enable | disable]
Description
This command is used to enable or disable debug flags for VRRP timers.
Parameters
state
- The state of VRRP timers debug flags. The default setting is disabled.
enable
- Enable VRRP timers debug flags.
disable
- Disable VRRP timers debug flags.
Restrictions
Only Administrator level users can issue this command.
Example usage:
Page 735 / 757
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
731
To enable VRRP timer debug flags:
DGS-3627:admin# debug vrrp timers state enable
Command: debug vrrp timers state enable
Success.
DGS-3627:admin#
debug vrrp show counter
Purpose
Used to display the VRRP debug statistic counters.
Syntax
debug vrrp show counter
Description
This command is used to display the VRRP debug statistic counters.
Parameters
None.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To display VRRP statistic counters:
DGS-3627:admin# debug vrrp show counter
Command: debug vrrp show counter
VRRP Debug Statistic Counters
Received ADV
: 9
Drop
: 52
Auth Fail
: 0
Sent ADV
: 0
DGS-3627:admin#
debug vrrp clear counter
Purpose
Used to reset the VRRP debug statistic counters.
Syntax
debug vrrp clear counter
Description
This command is used to reset the VRRP debug statistic counters.
Parameters
None.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To clear VRRP statistic counters:
DGS-3627:admin# debug vrrp clear counter
Command: debug vrrp clear counter
Success
DGS-3627:admin#

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top