1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DGS-3612
    5. /
  5. 106
Page 526 / 757 Scroll up to view Page 521 - 525
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
522
debug ospf virtual_link
Purpose
Used to enable or disable debug information flags about virtual link.
Syntax
debug ospf route virtual_link state [enable | disable]
Description
This command is used to enable or disable debug information flags about virtual link.
Parameters
state
- The state of the OSPF virtual link debug flag.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To enable all OSPF virtual link debug flags:
DGS-3627:admin# debug ospf virtual_link state enable
Command: debug ospf virtual_link state enable
Success.
DGS-3627:admin#
debug ospf route state
Purpose
Used to enable or disable debug information flags about OSPF route adding, modifying, and
deleting.
Syntax
debug ospf route state [enable | disable]
Description
This command is used to enable or disable debug information flags about OSPF route
adding, modifying, and deleting.
Parameters
state
- The state of OSPF route debug flag.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To enable all OSPF route calculating debug flags:
DGS-3627:admin# debug ospf route state enable
Command: debug ospf route state enable
Success.
DGS-3627:admin#
debug ospf timer state
Purpose
Used to enable or disable debug information flags for the OSPF timer.
Syntax
debug ospf timer state [enable | disable]
Description
This command is used to enable or disable debug information flags for the OSPF timer.
Parameters
state
- The state of the OSPF timer debug flag.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To enable the OSPF timer debug flag:
Page 527 / 757
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
523
DGS-3627:admin# debug ospf timer state enable
Command: debug ospf timer state enable
Success.
DGS-3627:admin#
debug ospf show counter
Purpose
Used to display OSPF statistic counters.
Syntax
debug ospf show counter {packet | neighbor | spf}
Description
This command is used to display OSPF statistic counters.
Parameters
packet
- To display the OSPF packet counter.
neighbor
- To display the OSPF neighbor event counter.
spf
- To display the OSPF SPF event counter.
If the parameter is not specified, all OSPF counters will be displayed.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To show all OSPF statistic counters:
DGS-3627:admin# debug ospf show counter
Command: debug ospf show counter
OSPF Debug Statistic Counters
Packet Receiving:
Total
: 30
Hello
: 30
DD
: 0
LSR
: 0
LSU
: 0
LSAck
: 0
Drop
: 0
Auth Fail : 0
Packet Sending:
Total
: 59
Hello
: 59
DD
: 0
LSR
: 0
LSU
: 0
LSAck
: 0
Neighbor State:
Change : 0
SeqMismatch : 0
SPF Calculation:
Intra
: 0
Inter
: 0
Extern : 0
DGS-3627:admin#
Page 528 / 757
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
524
debug ospf clear counter
Purpose
Used to reset OSPF statistic counters.
Syntax
debug ospf clear counter {packet | neighbor | spf}
Description
This command is used to reset OSPF statistic counters.
Parameters
packet
- To reset the OSPF packet counter.
neighbor
- To reset the OSPF neighbor event counter.
spf
- To reset the OSPF SPF event counter.
If the parameter is not specified, all OSPF counters will be cleared.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To clear all OSPF statistic counters:
DGS-3627:admin# debug ospf clear counter
Command: debug ospf clear counter
Success.
DGS-3627:admin#
debug ospf show request_list
Purpose
Used to display the current internal OSPF request list. This command can be used if one or
more OSPF neighbors remain in “Loading” state.
Syntax
debug ospf show request_list
Description
This command is used to display the current internal OSPF request list.
Parameters
None.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To display the current OSPF request list:
DGS-3627:admin# debug ospf show request_list
Command: debug ospf show request_list
OSPF Request List:
*Area 0.0.0.0:
Circuit: 1.1.1.1
Neighbor: 90.2.0.1
IP: 1.1.1.2
LSID: 192.194.134.0
RTID: 90.2.0.1
LSID: 192.194.135.0
RTID: 90.2.0.1
LSID: 192.194.136.0
RTID: 90.2.0.1
LSID: 192.194.137.0
RTID: 90.2.0.1
LSID: 192.194.138.0
RTID: 90.2.0.1
DGS-3627:admin#
Page 529 / 757
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
525
debug ospf show redistribution
Purpose
Used to display the current internal OSPF redistribute list. This command can be used if the
external route advertising is not correct.
Syntax
debug ospf show redistribution
Description
This command is used to display the current internal OSPF redistribute list.
Parameters
None.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To display the current OSPF redistribution list:
DGS-3627:admin# debug ospf show redistribution
Command: debug ospf show redistribution
OSPF Redistribution List:
IP
Nexthop
State Type Tag
------------------
---------------
----- ---- ---------------
1.1.1.0/24
0.0.0.0
ON
2
0.0.0.0
OSPF ASE Table:
IP
Nexthop
State Type Tag
------------------
---------------
----- ---- ---------------
1.1.1.0/24
0.0.0.0
ON
2
0.0.0.0
DGS-3627:admin#
debug ospf show summary_list
Purpose
It is used to display the current internal OSPF summary list. This command can be used if
one or more OSPF neighbors state stay at ExStart or Exchange.
Syntax
debug ospf show summary_list
Description
This command is used to display the current internal OSPF summary list.
Parameters
None.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To display the current OSPF summary list:
Page 530 / 757
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
526
DGS-3627:admin# debug ospf show summary_list
Command: debug ospf show summary_list
OSPF Summary List:
Area 0.0.0.0:
Circuit: 1.1.1.1
Neighbor: 90.2.0.1
IP: 1.1.1.2
LSID: 1.1.1.1 RTID: 1.1.1.1
Circuit: 2.2.2.1
Circuit: 10.1.1.6
DGS-3627:admin#
debug ospf show detail
Purpose
It is used to display LSAs with detail information. This command can be used if the route
calculation is not correct.
Syntax
debug ospf show detail [rt_link | net_link | summary_link | external_link | type7_link]
Description
This command is used to display LSAs with detail information.
Parameters
rt_link
- Display all Router LSAs with detail information.
net_link
- Display all Network LSAs with detail information.
summary_link
- Display all Summary LSAs with detail information.
external_link
- Display all AS external LSAs with detail information.
type7_link
- Display all type-7 LSAs with detail information.
Restrictions
Only Administrator level users can issue this command.
Example usage:
To display current OSPF router link LSA detail information:

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top