36

System Setting

The System Setting includes the System name, Location name, Login

Timeout, IP Address, Subnet Mask, and Gateway. Through the Web

Management Utility, you can easily recognize the device by using the System

Name and the Location Name.

The Login Timeout is to set the idle time-out for security issues. When there

is no action in running the Web Smart Utility and it times out, you must

re-login to Web Smart Utility before you set the Utility.

Fill in the IP Address, Subnet Mask and Gateway for the device.

Figure 38.

37

Trap Setting

The Trap Setting enables the device to monitor the Trap through the Web

Management Utility, set the Trap IP Address of the manager where the trap to

be sent.

Figure 39. Trap Setting

System Events:

Monitoring the system’s trap.

Device Bootup:

a trap when booting up the system.

Illegal Login:

a trap when there is using a wrong password login, and it

will record from where the IP to be login.

Fiber Port Events:

Monitoring the Fiber port status.

Link Up/Link Down:

a trap when there is linking status happens in

fiber port.

Abnormal* Receive Error:

a trap when there are receive data error in

fiber port.

Abnormal* Transmit Error:

a trap when there are transmit data error

in fiber port.

Copper Port Events:

Monitoring the Copper port status.

Link Up/Link Down:

a trap when there is linking status happens in

copper port.

Abnormal* Receive Error:

a trap when there are receive data error in

copper port.

Abnormal* Transmit Error:

a trap when there are transmit data error

in copprt port.

Abnormal*: 50 error packet count within 10 seconds.

38

Password Setting

Password is the invaluable tool for the manager to secure the Web

Management Switch. You can use this function to change the password.

If you forget the password, press the “Reset” button in the rear panel of the

Switch. The current setting includes VLAN, Port Setting… etc. will be lost

and the Switch will be restored to the default setting.

Figure 40. Set Password

Backup Setting

The backup tools help you to backup the current setting of the Switch. Once

you need to backup the setting, press the

“Backup”

button to save the setting.

To restore a current setting file to the device, you must specify the backup file

and press the

“Restore”

button to process the setting of the recorded file.

Figure 41. Backup Setting

Note: When restoring a recorded file, the current password will not be

erased.

39

Reset Setting

The Factory Reset button helps you to reset the device back to the default

setting from the factory. Be aware that the entire configuration will be reset;

the IP address of the device will be set to the default setting of 192.168.0.1.

Figure 42. Reset Setting

Logout

When you select this function, the Web configuration will log out and return to first Login

page.

Figure 43. Logout

40

TECHNICAL SPECIFICATIONS

General

Standards

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T Gigabit Ethernet

IEEE 802.3x Full Duplex Flow Control

IEEE 802.3z 1000BASE-SX/LX Gigabit Ethernet

Protocol

CSMA/CD

Data Transfer

Rate

Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)

Fast Ethernet: 100Mbps (half-duplex), 200Mbps

(full-duplex)

Gigabit Ethernet: 2000Mbps (full-duplex)

Topology

Star

Network

Cables

10BASET: 2-pair UTP Cat. 3, 4, 5; up to 100m

100BASE-TX: 2-pair UTP Cat. 5; up to 100m

1000BASE-T: 4-pair UTP Cat. 5; up to 100m

Fiber module: mini-GBIC Fiber module

Number of

Ports

48 × 10/100/1000Mbps Auto-MDIX RJ-45 ports

4 × mini-GBIC fiber slots

Physical and Environmental

AC inputs

100-240V AC, 50-60 Hz internal universal power supply

Power

Consumption

68.88 Watts (Max)

Temperature

Operating: 0

°

~ 40

°

C (32

°

~ 104

°

F), Storage: -10

°

~ 70

°

C

(14

°

~ 158

°

F)

Humidity

Operating: 10% ~ 90%, Storage: 5% ~ 90%

Dimensions

440 x 310 x 44 mm (W x H x D) (17.3 x 12.2 x 1.7 in)

EMI:

FCC Class A, CE Mark Class A, VCCI Class A

Safety:

CUL