1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DGS-1224T
    5. /
  5. 4
Page 16 / 38 Scroll up to view Page 11 - 15
13
UNDERSTANDING LED INDICATORS
The front panel LEDs provides instant status feedback, and, helps
monitor and troubleshoot when needed.
Figure 6. LED indicators of the Switch
Power and System LEDs
Power: Power Indicator
On
When the Power LED lights on, the Switch is receiving power.
Off
When the Power turns off or the power cord has improper connection.
CPU: Management Indicator
Blinking
When the CPU is working, the System LED is blinking.
On/Off
The CPU is not working.
Page 17 / 38
14
Ports 1~24 Status LEDs
Link/Act:
On
When the Link/Act LED lights on, the respective port is successfully
connected to an Ethernet network.
Blinking
When the Link/Act LED is blinking, the port is transmitting or receiving
data on the Ethernet network.
Off
No link.
100/1000Mbps
Green
When the 1000Mbps LED lights Green, the respective port is connected
to a 1000Mbps Gigabit Ethernet network.
Amber
When the 100Mbps LED lights Amber, the respective port is connected
to a 100Mbps Fast Ethernet network.
Off
When the respective port is connected to a 10Mbps Ethernet
Option Ports Mini GBIC 1 & Mini GBIC 2 Mini GBIC
Status LEDs
Link/Act:
On
When the Mini GBIC module is installed and connected to a network, the
Link/Act LED lights on.
Blinking
When the LED is blinking, the Mini GBIC module is receiving data on a
network.
Off
No link.
1000Mbps
On
When the 1000Mbps LED lights on, the respective port is connected to a
1000Mbps Gigabit Ethernet network.
Off
When the respective port is disconnected to the network
Page 18 / 38
15
CONFIGURATION
Through the Web Browser you can configure the Switch such as
VLAN, Trunking, QoS…
etc.
With the attached Web Management Utility, you can easily discover
all the Web Management Switch, assign the IP Address, changing the
password and upgrading the new firmware.
Installing the Web Management Utility
The following gives instructions guiding you through the installations
of the Web Management utility.
1.
Insert the Utility CD in the CD-Rom Drive.
2.
From the
Start
menu on the Windows desktop, choose
Run
.
3.
In the
Run
dialog box, type D:\Web Management
Utility\setup.exe (D:\ depends where your CD-Rom drive is
located) and click
OK
.
4.
Follow the on-screen instructions to install the utility.
5.
Upon completion, go to
Program Files ->
web_management_utility
and execute the Web Management
utility. (Figure 7.)
Page 19 / 38
16
Figure 7. Web Management Utility
The Web Management Utility was divided into four parts,
Discovery
List, Monitor
List, Device Setting
and
Toolbar function
, for details
instruction, follow the below section.
Discovery List
This is the list where you can discover all the Web management
devices in the entire network.
By pressing the
“Discovery”
button, you can list all the Web
Management devices in the discovery list.
Double click or press the
“Add to monitor list”
button to select a
device from the Discovery List to the Monitor List.
Page 20 / 38
17
System word definitions in the Discovery List:
l
MAC Address:
Shows the device MAC Address.
l
IP Address:
Shows the current IP address of the device.
l
Protocol version:
Shows the version of the Utility protocol.
l
Product Name:
Shows the device product name.
l
System Name:
Shows the appointed device system name.
l
Location:
Shows where the device is located.
l
Trap IP:
Shows the IP where the Trap to be sent.
l
Subnet Mask:
Shows the Subnet Mask set of the device.
l
Gateway:
Shows the Gateway set of the device.
Monitor List
All the Web Smart Device in the Monitor List can be monitored; you
can also receive the trap and show the status of the device.
System word definitions in the Monitor List:
l
S:
Shows the system symbol of the Web-Smart device,
represent for device system is not alive.
l
IP Address:
Shows the current IP address of the device.
l
MAC Address:
Shows the device MAC Address.
l
Protocol version:
Shows the version of the Utility protocol.
l
Product Name:
Shows the device product name.
l
System Name:
Shows the appointed device system name.
l
Location:
Shows where the device is located.
l
Trap IP:
Shows the IP where the Trap to be sent.
l
Subnet Mask:
Shows the Subnet Mask set of the device.
l
Gateway:
Shows the Gateway set of the device.

Rate

124.8 / 5 based on 304 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top