Page 111 / 139
Scroll up to view Page 106 - 110
5.
The first policy rule is now created. Repeat step 4 to create services named
allow_imap
,
allow_ftp
and
allow_http
. The services for these policies should be
imap
,
ftp_passthrough
and
http
.
The policy list for
LAN->toMainOffice
should now look like this.
6.
Click
Activate
and wait for the firewall to restart.
Page 112 / 139
112
Settings for Main office
1.
Setup policies for the new tunnel,
Firewall->Policy:
Click
Global policy parameters
Disable
Allow all VPN traffic: internal->VPN, VPN->internal and VPN->VPN
Click
Apply
2.
Now is it possible to create policies for the VPN interfaces. Select from
toBranchOffice
to
LAN
and click
Show
.
3.
Create same 4 policy rules as was created on the branch office firewall (
allow_pop3
,
allow_imap
,
allow_ftp
and
allow_http
).
4.
Click
Activate
and wait for the firewall to restart.
Page 113 / 139
Windows XP client and PPTP server
Settings for the Windows XP client
1.
Open the control panel (Start button -> Control panel).
2.
If you are using the Category view, click on the
Network and Internet Connections
icon. Then click
Create a connection to
the network on your workplace
and
continue to step 6.
If you are using the Classic view, click on the
Network Connections
icon.
3.
Under Network task, click
Create
a
new
connection
4.
The
New connection wizard
window opens up. Click
next
.
Page 114 / 139
114
5.
Select
Connect to the network at my workplace
and click
Next
Page 115 / 139
6.
Select
Virtual Private Network connection
and click
Next
19216811.live