D-Link DES-6500 Router Manual PDF (Setup & Configuration Guide)

Page 181 / 216 Scroll up to view Page 176 - 180

D-Link DES-6500 Layer 3 Stackable Gigabit Ethernet Switch

163

the session.

SessionFramesTx

This is the number of 802.1x frames that the switch has transmitted

during the session.

SessionId

This is a unique identifier for this session, in the form a an alphanumeric

string.

SessionAuthenticMethod

This is the authentication method used to establish the session.

SessionTime

This is the duration of the session in seconds.

SessionTerminateCause

This is the reason for the termination of the session.

SessionUserName

This is the user name that represents the identity of the Supplicant PAE.

802.1x Statistics

This page displays information gathered by the switch, collected in the form of MIBs, that

may prove useful in determining the functionality of 802.1x on the switch.

The

802.1x Statistics

link is accessed under the

Port Access Control

folder

Page 182 / 216

D-Link DES-6500 Layer 3 Stackable Gigabit Ethernet Switch

164

Figure 6- 22. 802.1x Statistics

Information displayed on this screen is described as follows:

Parameter

Description

EapolFramesRx

This counts the number of EAPOL frames, of any type, received by the

switch.

EapolFramesTx

This counts the number of EAPOL frames, of any type, transmitted by

the switch.

EapolStartFramesRx

This counts the number of EAPOL Start frames that have been

transmitted by the Supplicant.

EapolReqIdFramesTx

This counts the number of valid EAP Response frames, other than

Resp/Id frames, that have been transmitted by the Supplicant.

EaplogoffFramesRx

This counts the number of EAPOL Logoff frames that have been

received by the Supplicant

Page 183 / 216

D-Link DES-6500 Layer 3 Stackable Gigabit Ethernet Switch

165

received by the Supplicant.

EapolReqFramesTx

This counts the number of EAP Req frames that have been transmitted

by the Supplicant.

EapolRespIdFramesRx

This counts the number of EAP Resp/Id frames that have been

transmitted by the Supplicant.

EapolRespFramesRx

This counts the number of EAP Resp frames that have been received

by the Supplicant.

InvalidEapolFramesRx

This counts the number of EAPOL frames that have been received

by

the Supplicant in which the frame type was not recognized.

EapLengthErrorFramesRx

This counts the number of EAPOL frames that have been received

by

the Supplicant in which the Body Length field is invalid.

LastEapolFrameVersion

This is the protocol version number carried in the most recently

received EAPOL frame.

LastEapolFrameSource

This is the source MAC address carried in the most recently received

EAPOL frame.

Radius Account Client

This page displays information gathered by the switch, collected in the form of MIBs, that

may prove useful in determining the functionality of Radius authentication on the switch.

The

Radius Account Client

link is accessed under the

Port Access Control

folder

Page 184 / 216

D-Link DES-6500 Layer 3 Stackable Gigabit Ethernet Switch

166

Figure 6- 23. 802.1x Account Client

Information displayed on this screen is described as follows:

Parameter

Description

radiusAcctClientInvalidServerAddresses

This is the number of RADIUS Accounting-Response

packets received from unknown addresses.

radiusAcctClientIdentifier

This is the NAS-Identifier of the RADIUS accounting

client.

This is not necessarily the same as sysName.

radiusAccServerIndex

This is a number that uniquely identifies each RADIUS

Accounting server with which this client communicates.

radiusAccServerAddress

This is the IP address of the RADIUS accounting server

referred to above.

Page 185 / 216

D-Link DES-6500 Layer 3 Stackable Gigabit Ethernet Switch

167

radiusAccClientServerPortNumber

This is the UDP port number the client is using to send

requests to the RADIUS server.

radiusAccClientRoundTripTime

This is the time interval between the most recent

Accounting-Response and the Accounting-Request that

matched it from the RADIUS accounting server.

radiusAccClientRequests

This is the time interval between the most recent

Accounting-Response and the Accounting-Request that

matched if from the RADIUS accounting server.

radiusAccClientMalformedResponses

This is the number of malformed RADIUS Accounting-

Response packets received from the server.

Malformed

packets include packets with an invalid length.

Bad

authenticators and unknown types are not included.

radiusAccClientBadAuthenticators

This is the number of RADIUS Access-Response

packets containing invalid authenticators or Signature

attributes received from the server.

radiusAccClientPendingRequests

This is the number of RADIUS Accounting-Request

packets sent to the server that have not yet timed our or

received a response.

This variable is incremented when

an Accounting-Request is send and decremented due to

the receipt of an Accounting-Response, a timeout, or a

retransmission.

radiusAccClientTimeouts

This is the number of accounting timeouts to the server.

After a timeout, the client may retry to the same server,

send to a different server, or give up.

A retry to the

same server is counted as a retransmit as well as a

timeout.

A send to a different server is counted as an

Accounting-Request as well as a timeout.

radiusAccClientUnknownTypes

This is the number of RADIUS packets of unknown type

which were received from the server on the accounting

port.

RadiusAccClientPacketsDropped

This is the number of RADIUS packets which were

received from the server on the accounting port that

were dropped for some other reason.

Radius Auth Client

This page displays information gathered by the switch, collected in the form of MIBs, that

may prove useful in determining the functionality of Radius authentication on the switch.

The

Radius Auth Client

link is accessed under the

Port Access Control

folder

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share