D-Link DCS-950G Router Manual PDF (Setup & Configuration Guide)

Page 26 / 97 Scroll up to view Page 21 - 25

26

DCS-950G User’s Manual

D-Link Systems, Inc.

Using the Conﬁguration Menu

Home Screen

Wizard:

Setup:

Audio On:

Upside Down:

Mirrored:

Snapshot:

This page is used to set up the DCS-950G using the Wizard to

walk you through setting up the camera for your network.

This will allow you to change the conﬁguration settings of the

DCS-950G.

This will turn on the built-in microphone on the DCS-950G . By

default the audio is turned off.

This will ﬂip the image vertically. This feature can be used if you

choose to mount the DCS-950G upside down on the ceiling.

This will ﬂip the image horizontally in such a way that your left

side will be on the left side of the screen and vice versa.

Click to capture a snapshot image. The image will pop up in a

new window. This image can be saved to a local hard drive.

Page 27 / 97

27

DCS-950G User’s Manual

D-Link Systems, Inc.

Using the Conﬁguration Menu

On-line User Icon:

Start Video

Recording:

Logout:

Nightshot:

Brightness:

File Path:

Click to log out of the DCS-950G. If you would like to view or

conﬁgure the camera, you will must log in again.

Select this if the camera is operating under low light conditions.

In this setting the DCS-950G will be able to view at 0.5 Lux.

There are 5 settings each for more brightness and less

brightness from 0. After selecting your setting, please wait a

few seconds for the camera to adjust accordingly.

The DCS-950G will be able to detect simultaneous users

connected to it and indicate the amount with a digital readout

next to the green icon on the video window.

The DCS-950G is able to record video from the Web Browser

into a local hard drive of the PC that is viewing it. This path can

be speciﬁed (for example, c:\dcs950G\myrecording).

Clicking this button will start recording video and audio

immediately to the ﬁle path speciﬁed above.

Page 28 / 97

28

DCS-950G User’s Manual

D-Link Systems, Inc.

Using the Conﬁguration Menu

Conﬁguration

Click on

Setup

from the Home screen to access the settings required for the DCS-

950G.

There will be several options in the Conﬁguration page to choose from to setup your

DCS-950G and they are as follows:



Advanced

Video

User

LAN

PPPoE

DDNS

Wireless

Site Survey



Tools

Admin

Time

System

Firmware

Recording

Trigger



Status

Device Info



Help

Page 29 / 97

29

DCS-950G User’s Manual

D-Link Systems, Inc.

Using the Conﬁguration Menu

Advanced

The Advanced tab provides the following conﬁguration options: Video, User, LAN,

PPPoE, DDNS, Wireless, and Site Survey.

Video

Advanced > Video

Quality:

Default Level

Select the viewing video quality. By default the quality is set

to High.

This is the size of the video display. By default the capture

resolution is set to VGA (640x480).

Custom Level

Capture

Resolution:

This is the size of the video display. By default the capture

resolution is set to VGA (640x480).

Capture

Resolution:

Page 30 / 97

30

DCS-950G User’s Manual

D-Link Systems, Inc.

Using the Conﬁguration Menu

I-frame and P-frame mode and I-frame and BP-frames are

selectable. This determines how many repeated P frames will

appear after one I frame. A large “Key frame interval” can reduce

the bit rate, but can cause image to be corrupted longer if there

is packet loss while transmitting. The video quality may be poor

due to the sending of maximum frame rate within the limited

bandwidth when images are moving rapidly. Consequently, to

ensure detailed video quality (quantization rate) regardless of

the network, it will utilize more bandwidth to send the maximum

frames when images change drastically.

This is the refresh frame rate. By default the frame rate is set

to 15 frames per second (fps).

The higher the bit-rate the better the picture quality, but at the

same time the ﬁle size will also be larger. For low bandwidth

network a lower bit rate than 352k is advised

The camera name will display as the title of the window within

the Windows operating system. This name will also appear on

the log-in screen (once a password has been set).

Frame Rate:

Bit Rate:

Camera Name:

MPEG Sequence

Mode:

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share