D-Link DCS-5300W Router Manual PDF (Setup & Configuration Guide)

Page 6 / 109 Scroll up to view Page 1 - 5

6

Connections

Antenna

Two antennas are included with the

DCS-5300W

. These are screwed onto the

antenna connectors on the back panel to provide a connection with a wireless

network.

Ethernet Cable Connector

The Internet Camera’s back panel features an

RJ-45

connector for connections

to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling. This network

port supports the

NWay protocol

, allowing the Internet Camera to automatically

detect or negotiate the transmission speed of the network.

The Ethernet cable included with the

DCS-5300W

Internet Camera

is a Category 5

“straight through” cable.

This is the recommended

cable type when the camera is physically connected to a 100 Mbps

Fast Ethernet network hub or switch.

Antennas

Ethernet Cable Connector

DC Power Connector

I/O Connector

Microphone Connector

AV Out Connector

Microphone

The

DCS-5300W

Internet Camera’s has an internal microphone. However, you

have the option of using an external microphone by plugging it into the

microphone connector.

AV Out

Plug the included A/V cable into the A/V out connector to use the

DCS-5300W

with a television or VCR.

Page 7 / 109

7

DC Power Connector

The DC power input connector is located on the

DCS-5300W

Internet Camera’s

back panel and is labeled

12VDC

with a single socket to supply power to the

Internet Camera.

I/O Connector

The

DCS-5300W

provides a terminal block with two pairs of connectors situated

on the back panel. One pair is for input and the other is for output. The I/O

connectors provide the physical interface to send and receive digital signals to

a variety of external alarm devices.

Please refer to the Appendix (Page 93)

in this manual for detailed information.

Connections (continued)

Located on the bottom panel of the Internet Camera, the socket is used to con-

nect the camera stand to the Internet Camera by attaching the screw head on

the camera stand to the Internet Camera.

Bottom Panel

Socket for stand

Power LED

LED

stands for

L

ight-

E

mitting

D

iode.

The Power LED is positioned to the right of the Internet Camera lens.

As soon

as the power adapter is connected to the Internet camera the power LED will

flash

red

and

green

several times, the

DCS-5300W

is conducting a self-test.

Upon passing the self-test the LED will turn

green

to indicate a good connection

to an Ethernet port or

red

to indicate no connection has been made.

Attachment socket for the Camera Stand

Page 8 / 109

8

Connections (continued)

Included with the

DCS-5300W

is an infrared remote control. You have the option

of controlling the camera via the Pan/Tilt Controls using the IP surveillance

software or via the infrared remote. To use the remote, make sure that IR Control

is enabled on the

Camera Control

page in the Configuration Menu under

Advanced

.

Please refer to the section titled “Using the DCS-5300W with

an Internet Browser”

in this manual for more information.

Infrared Remote Control

Stop

Auto-Patrol

Auto-Pan

Center

Home

Arrows

Arrows -

Use the Up,Down, Left and Right arrows to tilt/

navigate the camera lens.

Home-

Returns the camera lens to the set home position.

Auto-Patrol-

Enables the Auto-Patrol function.

Auto-Pan-

Center-

Centers the camera lens.

Pans the camera one full cycle.

Stop-

Stops the movement of the camera during pan.

Page 9 / 109

9

Hardware Installation

Connect to an Ethernet Network

If you are connecting the

DCS-5300W

to a

wired

Ethernet network, connect an

Ethernet cable to the network cable

connector located on the Internet Camera’s

back panel and attach it to the network.

If you are connecting the

DCS-5300W

to a

802.11b wireless

Ethernet network, attach

the two wireless antennas to the antenna

connectors on the back panel of

the DCS-

5300W

.

Attach the external power supply

Attach the external power supply to the DC

power input connector located on the

Internet Camera’s back panel (labeled

12VDC

) and connect it to your wall outlet.

The Internet Camera comes with a camera

stand with a swivel ball screw head that

can be attached to the Internet Camera

bottom socket cavity. Attach the camera

stand to the Internet Camera and station it

for your application. There are holes

located in the base of the camera stand

allowing the Internet Camera to be mounted

to the ceiling, or any wall securely.

Attaching the Internet Camera to the Camera Stand

When you have a proper connection, the LED will turn from

red

to

green

. The

light may cycle on and off and your computer may show an intermittent loss of

connectivity, this is normal until you have configured your Internet Camera.

Page 10 / 109

10

Software Installation

After you have successfully completed the hardware installation of the

DCS-5300W

Internet Camera, it is necessary to install software to configure

and operate the camera.

The first step is to run the

IP Installer

program on the

CD.

IP Installer

allows you to use the Internet Camera with your Internet browser.

With the

IP Installer

program you can enter settings that permit the camera to

access the Internet directly or through your Ethernet network.

After the

IP Installer

software program is completed, you will have an operating

and controllable Internet Camera.

From your Internet Explorer Web browser

you will be able to access the video and sound from the Internet camera. The

camera has a built-in Web server. This Web server will allow the camera to

access the Internet without being attached to a computer and permits users to

view the video and audio remotely.

However, it is necessary to install the

IP surveillance

software from the enclosed

CD to create a truly powerful monitoring and surveillance system. The following

section will detail the installation of the

IP Installer

and the

IP surveillance

software.

Installing the IP Installer program

Insert the CD that is included with the

DCS-5300W

Internet Camera

. The

DCS-5300W

installation menu will start up automatically from the CD. If the CD

does not startup automatically (the Windows operating system may turn this

function off), simply access the CD from Windows and click on the autorun.exe

program to access the installation menu shown below:

Click

IP Installer

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share