D-Link DCS-5300W Router Manual PDF (Setup & Configuration Guide)

Page 51 / 109 Scroll up to view Page 46 - 50

51

Configuration > Tools > System

Manual

-

Adjust the date and time according to what is

entered by the administrator. Notice the format in

the related field while typing.

Automatic

-

Synchronize with the NTP server over the Internet

whenever the

DCS-5300W

starts up. It will fail if

the assigned timeserver cannot be reached.

NTP server -

Assign the IP address or domain name of the

timeserver. Leaving the text box blank will let the

DCS-5300W

connect to default timeservers.

Time zone

-

Used to adjust the hour of timeservers for local

settings.

Keep current date and

time -

Using the DCS-5300W with an Internet

browser (continued)

Click to save the current date and time of

DCS-5300W

. An internal real-time clock maintains

the date and time even when the power is off.

Sync with computer time-

Click

Apply

to make

changes effective

Synchronize the date and time of

DCS-5300W

with the local computer. The date and time of the

PC is displayed and updated in the

DCS-5300W

.

Page 52 / 109

52

Configuration > Tools > Applications

Using the DCS-5300W with an Internet

browser (continued)

Click on the

Applications

button to access the Applications

settings from the

Tools

menu

.

Page 53 / 109

53

Configuration > Tools > Applications (Continued)

Weekly schedule:

Sunday through Saturday -

Select the weekdays that should perform the

following operations:

Snapshots begin at

-

Snapshots stop at

-

Sets the time to stop the operations.

Event operation:

Delay second(s) before

detecting next event -

Sets the time delay before restarting to check the

trigger condition when the current condition is

triggered.

Take snapshots at

second(s) after event -

After a snapshot is taken because of a trigger,

another snapshot will be taken after the

configured time in seconds.

Trigger condition -

There are 4 conditions related to the digital input

and three windows for motion detection. There

can be multiple selections. Select the appropriate

digital input condition according to the

characteristics of the external device.

High

or

low

indicate external voltage input for level trigger,

while

rising

or

falling

is for edge trigger. There

are three windows shown for the name you

defined for

motion detection.

Undefined

will

show instead of the window title if motion

detection is not setup yet.

Reset output -

Check and save this option to reset the external

device at the digital output back to the original

state.

Using the DCS-5300W with an Internet

browser (continued)

Set the time to start operations. Setting the

begin

time the same as the

stop

time will

force the operations to run continuously.

Page 54 / 109

54

Configuration > Tools > Applications (Continued)

Trigger action -

There are four options for two actions regarding

either trigger condition. They can have multiple

selections. While choosing the trigger output

alarm, the digital output will short both pins to

connect the circuit of the attached external

device; otherwise both pins will be open. While

choosing to upload snapshots, the method can

be either email or FTP. The snapshot names will

be

“videopre.jpg”,

videotrg.jpg”,

and

“videopos.jpg” respectively for the snapshots

before event, right upon event, and after event.

The date and time suffix may be added according

to the option. Confirm the external mail or FTP

server settings in network configuration.

Sequential operation

Using the DCS-5300W with an Internet

browser (continued)

Snapshot every

The camera

will send snapshots at the specified

interval to the external server according to the

chosen method. Remember this operation is

dependent to the weekly schedule.

Send snapshots by email -

Any upload action specified in the options above

will use the method chosen here. The captured

snapshot named “video.jpg” will be attached in

the email with subject “Periodic snapshots.”

Send snapshots by FTP -

The captured snapshots will upload to the

external FTP server with the file name depending

on the next option.

second(s) -

Page 55 / 109

55

Configuration > Tools > Applications (Continued)

Click on the

Default

button to access the factory

Default

settings from the

Tools

menu

.

Click

Apply

under

Restore Factory Default

to restore the factory default

settings. This means any changes made will be lost and the system will be

reset to the initial status when shipped from the factory. After confirmation, the

system will restart and require the

IP Installer

software program to setup the

DCS-5300W

.

Using the DCS-5300W with an Internet

browser (continued)

Click

Apply

to make

changes effective

Configuration > Tools > Default

FTP put snapshots with

date and time suffix -

If the suffix is added, the captured date and time

can be easily differentiated from the snapshot file

name in either sequential or event operation. For

instance, “[email protected]” means

the JPEG image was captured at 4 minutes and

5 seconds after 3 o’clock, January 2nd, A.D. 2002.

If the suffix is omitted, the file named “video.jpg”

on the external FTP server will be refreshed at

the specified interval.

Click

Default

Click

Apply

under

Calibrate

to restore the factory default settings. This means

that the camera will be recalibrated to the default center to recoverthe tolerance

caused by some external forces.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share