Page 16 / 67
Scroll up to view Page 11 - 15
16
D-Link DCS-3410 User Manual
Section 3 - Configuration
Select static IP to use the same IP address at each boot up.
Click
Next
Select DHCP if you want to obtain a new IP address every time
the camera boots up.
Click
Next
Page 17 / 67
17
D-Link DCS-3410 User Manual
Section 3 - Configuration
Click
Link
Click the button labeled
Link
to access the web configuration page.
The Setup Wizard will automatically open your web browser to the IP
address of the DCS-3410, in this example it is: http://19±.198.0.1±0.
Your DCS-3410 may have a different IP Address.
Click
Restart
Click
Restart
to save your settings and reboot the Network Camera.
Page 18 / 67
18
D-Link DCS-3410 User Manual
Section 3 - Configuration
Web-based Configuration Utility
To access the configuration utility, open a web-browser such
as Internet Explorer and enter the IP address for your Network
Camera (http://19±.168.0.1±0)
Note:
address may differ.
Enter
Admin
for the username and then leave the password
blank by default.
Note:
To change your password at a later time, please
refer to page 38.
This section will show you how to configure your new D-Link Network Camera using the Web-based Configuration Utility.
Click
OK
Page 19 / 67
19
D-Link DCS-3410 User Manual
Section 3 - Configuration
Live Video
Camera
This section shows your camera’s live video. You may select the available thumbnails for your option of predefined
Video Profile
,
Full Screen
mode, and action items of taking
Snapshot
,
Recording
,
Set Storage Folder
,
Listen
,
Talk
, and
Digital Output
. You may
also select your language setting using the drop-down menu.
You can zoom in and out of the live video image using your mouse. Right-click to zoom out and left-click to zoom in on the image.
Digital Input
Indicator:
Motion Trigger
Indicator:
Recording
Indicator:
This indicator will light up when there is an
available digital input signal.
When a trigger event occurs, this will light up.
Note:
The video motion feature for your
camera must be enabled.
When a recording is in progress, this indicator
will light up.
Video Profile 1
Video Profile 2
Video Profile 3
Video Profile 4
Full screen mode
Taking a Snapshot
Recording a Video Clip
Set a Storage Folder
Listen/Stop Listening
Talk/Stop Talking
Start/Stop Digital Output
Page 20 / 67
±0
D-Link DCS-3410 User Manual
Section 3 - Configuration
Setup
Wizard
To quickly configure your Network Camera, click
Internet
Connection Setup Wizard,
or click
Manual Internet Connection
Setup
to manually configure your Network Camera.
To quickly configure your Network Camera’s motion detection
settings, click
Motion Detection Setup Wizard
and skip to page
±4. If you want to enter your settings without running the wizard,
click
Manual Motion Detection Setup
and skip to page ±7.
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the
internet. Click
Next
to continue.
Click
Next
19216811.live