1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DCS-3220G
    5. /
  5. 24
Page 116 / 141 Scroll up to view Page 111 - 115
116
Playback Program (continued)
Using IP surveillance Software (continued)
Full Screen
When you click on the “Full Screen” button, the video sequence will be enlarged
to the whole screen instantly. You can double click on any place or the “ESC”
key to return back to the normal screen. When you switch to the full screen
display, you can press the “Alt” and “Space” keys together to pop the jog dial to
control the displaying video sequence. Press the same keys again to close the
jog dial. You can also press the “Alt” and “Enter” keys together to switch between
the normal display and full screen display at any time when the program is
under the normal display mode.
Searching Range Adjustment Toolbox
When you move the mouse cursor to the alert histogram area, the display
adjustment toolbox will change to a range adjustment toolbox. The range
adjustment toolbox provides a faster way to change the range of the displayed
time period. By using this toolbox, you can browse the database of one location
from any 10-second interval of the entire range. The figure below shows the
searching range adjustment toolbox composed of its own three elements, i.e.
“Zoom In”, “Zoom Out”, and “Full Range.”
Zoom In
Each time you click on the “Zoom In” button in the searching range adjustment
toolbox, the displayed time period will be half in the center of the original time
period until the period is equal to 10 seconds. You can see the new interval in
more details. The scale of pull bar and alert histogram window change. The
period start and end time change as well. The period selector will show the
new start and end time. The display area will restart and display the new period
from the newly defined start time.
Page 117 / 141
117
Zoom Out
Playback Program (continued)
Using IP surveillance Software (continued)
Lock Window
Each time you click on the “Zoom Out” button in the searching range adjustment
toolbox, the displayed time period will be double in the center of the original
time period unless the start time or end time exceeds the whole database time-
boundary. The scale of the pull bar and alert histogram window change. The
period start and end time change as well. The period selector will show the
new start and end time. And the display area will restart and display the new
period from the newly defined start time
.
When you click on the “Full Range” button, you will get the same functionality
as when you change the playback method selector to “Full Range.”
System Control Toolbox
The system control toolbox provides some basic operations for the playback
program. The figure below shows the three elements of the system control
toolbox, i.e. “Lock Window”, “Settings”, “Minimize”, and “Exit.”
Full Range
If you are away from your computer, for security reasons, we recommend that
you to close the playback program or you can just click on the “Lock Window”
button to lock the main window. Once you click this button, the main window
will be hidden and the login dialog will appear. To return to the main window, you
need to re-enter the admin’s password again.
Page 118 / 141
118
Settings
Playback Program (continued)
Using IP surveillance Software (continued)
The settings dialog will pop up when you click the “Settings” button. For more
information about setting this program, please refer to the section titled
"Settings.”
Minimize
Click this button in order to minimize the playback program window.
Exit
The playback program will be closed immediately when you click on the “Exit”
button.
Page 119 / 141
119
Schedule Video Recording with Motion
Detection
Next, run the
IP surveillance
program. Click on the
Configurations
button
and select
Scheduler
.
c
Check “Enable motion detection.”
d
Click on “New” to have a new window to monitor video.
e
Enter in a window name.
f
Adjust the “Sensitivity” and “Percentage” levels according to the local
environment. The highest sensitivity and lowest percentage provides
the most sensitive setting.
5
After adding the motion window, click on save to enable the
activity display. You can add up to 3 motion windows to trigger
recording.
To schedule video recording with motion detection, you must first enable motion
detection on the Internet Camera. Click the
Motion Detection
button under
the
Advanced
tab from the
Configuration
screen to access settings that affect
how the
DCS-3220
Internet Camera can serve as a security device by recording
only when motion is detected. Note: These settings can be configured in your
Web browser and while logged into the
IP surveillance
Program.
In this window, follow the steps below to ensure that motion detection is correctly
enabled:
Click
Motion Detection
For detailed information about each setting, please refer to
Configuration >
Advanced > Motion Detection
in the section titled “Using the DCS-3220 With
an Internet Browser” (page 48).
Page 120 / 141
120
Schedule Video Recording with Motion
Detection (continued)
In the
Primary Schedule
you can choose either
Once
(for one time recording)
or
Every Day
(for scheduled recording). For example, if you would like to record
events every day during a certain time frame, click on the beginning time and
drag your mouse to the ending time. Schedule recording can be configured by
minutes, hours, days, weeks, or months.
The
Secondary Schedule
allows you to set a schedule outside the
Primary
Schedule
. The
Secondary Schedule
provides two options to record without
a specified date or time. You can select
Event Mode
, which will record
whenever an event is triggered, or
Continuous Mode
, which will begin
continuously after scheduling settings are saved. You do not need to set the
Secondary Schedule
with the
Primary Schedule
. To schedule video recording
with motion detection, you can use either the
Primary Schedule
or
Secondary
Schedule
, or both.
Click
Scheduler

Rate

4 / 5 based on 1 vote.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top