Page 136 / 139 Scroll up to view Page 131 - 135
1²µ
D-Link DCS-±1±0 User Manual
Appendix B - Networking Basics
Networking Basics
Check your IP Address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from
a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on
Start
>
Run
. In the run box type
cmd
and click
OK
.
At the prompt, type
ipconfig
and press
Enter
.
This will display the IP address, subnet mask, and
the default gateway of your adapter.
If the address is 0.0.0.0, check your adapter
installation, security settings, and the settings
on your router. Some firewall software programs
may block a DHCP request on newly installed
adapters.
If you are connecting to a wireless network at a
hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network
settings.
Page 137 / 139
1²¶
D-Link DCS-±1±0 User Manual
Appendix B - Networking Basics
Statically Assign an IP Address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps
below:
Step 1
Windows
®
XP - Click on
Start
>
Control Panel
>
Network Connections
.
Windows
®
2000 - From the desktop, right-click
My Network Places
>
Properties
.
Step 2
Right-click on the
Local Area Connection
which represents your D-Link network adapter and select
Properties
.
Step 3
Highlight
Internet Protocol (TCP/IP)
and click
Properties
.
Step 4
Click
Use the following IP address
and enter an IP address that is on the same subnet as your network or the LAN
IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address
192.168.0.X where X is a number between 2 and 99. Make sure that the number
you choose is not in use on the network. Set Default Gateway the same as the LAN
IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
Page 138 / 139
1²·
D-Link DCS-±1±0 User Manual
Appendix C - Technical Specifications
Technical Specifications
Remote Management
• Configuration Accessible via a Web Browser
• Take Snapshots and Save to a Local Hard Drive via a
Web Browser
Networking Protocols
• TCP/IP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP
,
DDNS, PPPoE, Support
Connectivity
• 802.11g Wireless
• 10/100Mbps Fast Ethernet
• Auto Negotiation
Video Algorithm Supported
• 3G video/ISMA
1
• Enhanced Video Compression Using MPEG4
Simple Profile
Video Resolution
2
• Up to 30fps at 160x120
• Up to 30fps at 176x144
• Up to 30fps at 320x240
• Up to 30fps at 640x480
Audio
• 16kbps~128kbps (AAC)
• 4.75kbps~130kbps (GSM-AMR)
Camera Specification
• 1/4” CMOS Sensor
• 0.5 Lux @ F1.4
• AGC/AWB/AES
• Electronic Shutter: 1/60~1/15000 sec.
• Standard Fixed Mount Type Lens 4mm, F2.0
• 62
o
Field of View
Security
• Administrator and User Group Protected
• Password Authentication
IP Surveillance Software
• Remotely Manage and Control up to 16 DCS-2120 Internet
Cameras
• View Up to 16 Cameras on one screen
• Supports all Management Functions Provided in Web
Interface
• Scheduled Motion Triggered, or Manual Recording
Options
Viewing System Requirement Protocol
• ActiveX
Operating System
• Microsoft Windows
®
XP/2000
Browser
• Internet Explorer v6
LEDs
• Two-Color LED
Power
• External Power Supply
• 5V DC 2.0A
• Power Consumption 5.5W
Page 139 / 139
1²¸
D-Link DCS-±1±0 User Manual
Appendix C - Technical Specifications
Version 2.0
05/15/2008
Dimensions
• 4.5” (L) x 3.125” (W) x 1.625” (H)
1
3G phone must be equipped with 3G video playback such as RealPlayer
®
or PacketVideo for Symbian or PocketPC.
2
4X digital zoom enlarges an image by magnifying the pixels in a selected portion of the image by 4 times.
Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental
factors will adversely affect wireless signal range.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top