Page 46 / 139
Scroll up to view Page 41 - 45
³µ
D-Link DCS-±1±0 User Manual
Section ² - Configuration
The Device Info screen lists the following important
settings that are currently set for the DCS-2120:
•
IP camera name
•
Time and Date
•
Firmware Version
•
IP address
•
IP Subnet mask
•
Default Gateway
•
Primary DNS
•
Secondary DNS
•
PPPoE
•
DDNS
Device Info
Status
Page 47 / 139
³¶
D-Link DCS-±1±0 User Manual
Section ² - Configuration
Log
The content of the log file reveals useful information about the current configuration and connection logged after the
DCS-2120 starts up.
This option enables the camera to send
camera log files to a remote server.
The IP address of the remote server.
The port number of the remote log server.
The default port is 514.
View the system log file. The content of the
file reveals useful information about camera
configuration and connectivity status after
the camera boots up.
Enable remote log:
IP Address:
Port:
Current log:
Page 48 / 139
³·
D-Link DCS-±1±0 User Manual
Section ² - Configuration
The help page provides detailed information for the camera’s Web interface.
Help
Page 49 / 139
³¸
D-Link DCS-±1±0 User Manual
Section ² - Configuration
Administrators can combine options on the application page to perform many useful security applications. To upload
the snapshots, users can choose either email or FTP according to the user’s needs. Both e-mail and FTP use the
network settings on the network page. This section describes how to enable motion detecting and record snapshots
to an FTP server.
Administrators can utilize the built-in motion detection to monitor any abnormal movement and then record the snapshots
to an FTP server.
Record Snapshots to your FTP server with Motion Detection
Page 50 / 139
´0
D-Link DCS-±1±0 User Manual
Section ² - Configuration
In this window, follow the steps below to ensure that motion detection is correctly enabled:
1 Check “Enable motion detection.”
2 Click on “New” to have a new window to
monitor video.
3 Enter in a window name.
4 Tune the “Sensitivity” and “Percentage”
according to the local environment.
Combined higher sensitivity with lower
percentage gives you high sensitivity for the
motion detection.
5 Click on save to enable the activity
Next, click the Mail and FTP button under the Setup tab to set the FTP server settings for the DCS-2120.
19216811.live