Page 11 / 103
Scroll up to view Page 6 - 10
11
Software Installation (continued)
If you have a DHCP server on your network,
you will already have a valid IP Address in
these fields.
If you do not have a DHCP server on your
network fill out your
IP Address
,
Subnet
mask
,
Gateway
and at least one DNS IP
Address.
If you do not know what to put in these
fields, please contact your System
Administrator or your Internet Service
Provider.
Click
Next
Leave the box titled
This camera can be found by installer whenever it starts up
unchecked to avoid running this install application each time you boot up the
DCS-2100+
. Check this box if you need to change IP address the next time the
DCS-2100+
boots up.
Type in your
SSID
and
Connection type
con-
sistent with your network. (If you are
unsure, please contact your network
administrator).
Choose the
Channel
that is the same as your
other wireless devices that you would like to
connect to.
You can enable
Encryption
here (up to 256-
bit).
Click
Next
Select
Long
or
Short
Preamble. Long
Preamble
is the default setting. See page
31 for a description of Preamble.
You can choose a different
transmission rate
if you need to restrict the camera°s bandwidth.
Page 12 / 103
12
Click
OK
and the
DCS-2100+
Internet Camera will
reboot to accept the settings.
If
the
IP Installer
has not made any modifications to
the settings, it will warn you that the settings were
accepted but no changes were made.
You should now see the opening
IP Installer
screen with an IP address assigned
to the MAC address of the
DCS-2100+
.
Click on
Exit
to close
IP Installer
.
You have now completed the Setup Wizard and are ready to use your
camera! You can also continue to the next section to install the
IP Surveillance software before you begin to use the DCS-2100+.
Software Installation (continued)
If you need to make any changes,
click
Back
to modify your camera
settings.
To accept the settings,
click
Restart
.
Click
Restart
Page 13 / 103
13
Click
Next
Real-time Monitoring
Video Recording to hard disk
High quality video
High video compression ratio
Maximum of 16 cameras with different display layouts
Smart playback
Triggered event browsing
Fast database searching
Configurable automated alarms
Account password protection
Scheduled recording for each camera
Email / FTP video snapshots
AVI file export
Motion detection for each camera
The
IP Surveillance
software on the CD included with the
DCS-2100+
Internet
Camera converts the
DCS-2100+
into a powerful, yet flexible, surveillance
system for home or business, with these features:
Installing IP Surveillance Software
To install
IP Surveillance
, click on the
Install IP Surveillance
Software
on
the CD included with the Internet Camera. The
Welcome
screen appears:
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Page 14 / 103
14
Please read the Software Licensing Agreement and click
Yes
if you agree with
the agreement. Click
No
to exit the installation.
Enter your name and company information and click
Next
.
Click
Next
Installing IP Surveillance Software (continued)
Click
Yes
Page 15 / 103
15
Installing IP Surveillance Software (continued)
Click
Next
Click
Next
Select the
destination
directory.
Select the
program folder
the software will
be installed into.
19216811.live