Page 26 / 85
Scroll up to view Page 21 - 25
26
D-Link DCS-1110 User Manual
Section 3 - Configuration
If you are using a LAN connection,
select either Static IP or DHCP Client. If
you are manually assigning a Static IP,
enter your IP Address, IP Subnet Mask,
Gateway IP Address, and DNS into the
fields provided. If you are using a DHCP
network, you may choose DHCP client
and the IP address, IP subnet mask,
Gateway and DNS fields will be filled in
automatically.
LAN Settings:
LAN
Page 27 / 85
27
D-Link DCS-1110 User Manual
Section 3 - Configuration
If you are using a PPPoE connection,
click the
Yes
button and enter the User
Name and Password for your PPPoE
account.
PPPoE:
PPPoE
Page 28 / 85
28
D-Link DCS-1110 User Manual
Section 3 - Configuration
Dynamic DNS (Domain Name Service)
is a method of keeping a domain name
linked to a changing (dynamic) IP address.
With most Cable and DSL connections,
you are assigned a dynamic IP address
and that address is used only for the
duration of that specific connection.
With the DCS-1110, you can set up
your DDNS service and the DCS-1110
will automatically update your DDNS
server every time it receives a different
IP address. Depending on the service,
this update may take a few hours. If you
are using a DDNS connection, click the
Yes
button and enter in your User Name,
Password, and Domain Name.
DDNS:
DDNS
Page 29 / 85
29
D-Link DCS-1110 User Manual
Section 3 - Configuration
Adjust the resolution for the picture.
Specify the file name for the URL. The
default setting is “iMode”. The URL will be:
http://IP_Address_of_camera/iMode.
asp
iMode:
URL JPG
iMode Page
Name:
Page 30 / 85
30
D-Link DCS-1110 User Manual
Section 3 - Configuration
Enter the administrator user name
(admin).
Enter the current password.
Enter the new administrator password
with a maximum length of 16 (printable
ASCII) characters.
Confirm the new password by entering
it again.
User Name:
Password:
New Password:
Confirm
Password:
Tools
Admin
19216811.live