1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DCM-604
    5. /
  5. 3
Page 11 / 31 Scroll up to view Page 6 - 10
DCM-604 Cable Modem EMTA Gateway
User’s Manual
8
6.
Windows will locate the driver automatically. Please click
Continue
Anyway
to continue the installation process.
7.
Windows shall find the location of USB driver and complete the
installation. Click
Finish
.
Page 12 / 31
DCM-604 Cable Modem EMTA Gateway
User’s Manual
9
4.3
Windows Vista
1.
Connect USB cable from PC to cable modem.
2.
Connect RF cable and power on Cable Modem. Wait until it register, it will
take about 40 seconds to 4 minutes depends on network traffic. Cable
Modem may reboot if you previously connect it through Ethernet port.
3.
Windows will prompt new hardware found, insert the Driver CD into your
CD-ROM drive.
4.
Click “Locate and install driver software (recommended)” item
5.
Insert the Driver disk that came with your cable modem into your CD-
ROM drive. Windows Vista will automatically searched and found this
driver.
Page 13 / 31
DCM-604 Cable Modem EMTA Gateway
User’s Manual
10
6.
During the driver installation, your system may pop-up a dialogue as
below window, just click “Install this driver software anyway”.
7.
During the driver installation, your system may pop-up a dialogue as below
window, just click “Install this driver software anyway”.
8.
Click “Close” button to finish the driver installation.
Page 14 / 31
DCM-604 Cable Modem EMTA Gateway
User’s Manual
11
5.
Web Management
For easy-changing the default setting or quick-checking diagnostics for
troubleshooting, a Web-based GUI is built-in for your access.
5.1
Enter Modem's IP address
Use the following procedures to login to your DCM-604.
1.
Open your web browser.
You may get an error message. This is normal. Continue on to the next
step.
2.
Type the default IP address of the DCM-604 (e.g.
192.168.0.1
) and press
Enter.
3.
The Log In page appears. Type the user name (
admin
) and your
password (
password
) in the respective fields.
4.
Click the Logout button to leave the application.
Page 15 / 31
DCM-604 Cable Modem EMTA Gateway
User’s Manual
12
There are seven categories in this web management including Status, Basic,
Advanced and Firewall. The following sections describe their details.
5.2
Status
The Status page shows hardware and software information about the DCM-
604 that may be useful to your cable service provider.
5.2.1 Software Status
The Software page shows how long the DCM-604 has operated since last
being powered up, and some key information the DCM-604 received during
the initialization process with your cable service provider.
(Pls change the screen capture. Pls use f/w 4k)
5.2.2 Security
This page allows the configuration of administration access privileges and the
ability to restore the settings to factory defaults to the system and allows switching
to router or bridge mode. If DCM-604 mode set as bridge, the "basic", "advance"
and "firewall" tabs of webpage will be disabled. The DCM-604 home page will
change to 192.168.100.1. And to access home page, need to set up connected
device (PC) IP address as 192.168.100.xx. After changing the settings, click Apply,
then the modem will reboot to take effect setting. And wait for DCM-604 boot up
completes.

Rate

4 / 5 based on 1 vote.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top