D-Link DAP-2553 Router Manual PDF (Setup & Configuration Guide)

Page 66 / 70 Scroll up to view Page 61 - 65

66

D-Link DAP-2553 User Manual

Appendix B - Networking Basics

Networking Basics

Check your IP address

After you install your network adapter, by default, the TCP/IP settings should be set to obtain an IP address from a

DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

Click on

Start

>

Run

. In the run box type

cmd

and click

OK

.

At the prompt, type

ipconﬁg

and press

Enter

.

This will display the IP address, subnet mask, and

the default gateway of your adapter.

If the address is 0.0.0.0, check your adapter

installation, security settings, and the settings

on your router. Some ﬁrewall software programs

may block a DHCP request on newly installed

adapters.

If you are connecting to a wireless network at a

hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network

settings.

Page 67 / 70

67

D-Link DAP-2553 User Manual

Appendix B - Networking Basics

Statically Assign an IP address

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps

below:

Step 1

Windows

®

2000: Click on

Start

>

Settings

>

Control Panel > Network Connections

Windows XP: Click on

Start

>

Control Panel > Network Connections

Windows Vista

®

: Click on

Start

>

Control Panel > Network and Internet > Network and Sharing Center > Manage

network connections

Step 2

Right-click on the

Local Area Connection

which represents your network adapter and select

Properties

.

Step 3

Highlight

Internet Protocol (TCP/IP)

and click

Properties

.

Step 4

Click

Use the following IP address

and enter an IP address that is on the same subnet as your network or the LAN

IP address on your router.

Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between

2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the

LAN IP address of your router (192.168.0.1).

Page 68 / 70

68

D-Link DAP-2553 User Manual

Appendix B - Networking Basics

Set Primary DNS the same as the LAN IP address of your router

(192.168.0.1). The Secondary DNS is not needed or you may

enter a DNS server from your ISP.

Step 5

Click

OK

twice to save your settings.

Page 69 / 70

69

D-Link DAP-2553 User Manual

Appendix C - Technical Speciﬁcations

Technical Speciﬁcations

Standards

• IEEE 802.11a

• IEEE 802.11b

• IEEE 802.11g

• IEEE 802.11n (draft)

• IEEE 802.3

• IEEE 802.3u

• IEEE 802.3ab

• IEEE 802.3af

Network Management

• Web Browser interface

HTTP

Secure HTTP (HTTPS)

• AP Manager II

• SNMP Support

D-View Module

Private MIB

• Command Line Interface

Telnet

Secure SSH Telnet

Data Rates*

For 802.11a:

• 54, 48, 36, 24, 18, 12, 9, and 6 Mbps

For 802.11b:

• 11, 5.5, 2, and 1 Mbps

For 802.11g:

• 54, 48, 36, 24, 18, 12, 9, and 6 Mbps

For 802.11n (draft):

HT20/HT40

• 144.4/300, 130/270, 117/243, 104/216, 78/162, 66/135, 58.5/121.5,

52/108, 39/81, 26/54, 19.5/40.5, 12/27, and 6.5/13.5 Mbps

Security

• WPA™ Personal/Enterprise

• WPA2™ Personal/Enterprise

• WEP™ 64-/128-bit

• SSID Broadcast Disable

• MAC Address Access Control

Wireless Frequency Range

• 2.4 to 2.4835 GHz and 5.15 to 5.85 GHz

**

Operating Voltage

• 48V DC +/- 10% for PoE or 5V/2.5A

Radio and Modulation Type

For 802.11a/g/n:

BPSK, QPSK, 16QAM, and 64QAM with OFDM

For 802.11b:

DQPSK, DBPSK, DSSS, and CCK

Operating Frequency**

For 802.11a:

5.15 ~ 5.85 GHz

For 802.11b/g:

2.4 ~ 2.4835 GHz

For 802.11n:

2.4 GHz Band: 2.4 ~ 2.4835 GHz

5 GHz Band: 5.15 ~ 5.85 GHz

Dipole Antenna

• 3dBi Gain @2.4 GHz

• 5dBi Gain @5 GHz

* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n speciﬁcations. Actual data throughput will vary. Network conditions and

environmental factors, including volume of network trafﬁc, building materials and construction, and network overhead, lower actual data throughput rate. Environmental

factors will adversely affect wireless signal range.

Page 70 / 70

70

D-Link DAP-2553 User Manual

Appendix C - Technical Speciﬁcations

Transmit Output Power (at Antenna Connector)

• 15dBm @ 2.4GHz

• 16dBm @ 5GHz

EIRP

• 22.7dBm @ 2.4GHz

• 26.7dBm @ 5GHz

Max Power Consumption

• 10.5W

LEDs

• Power

• LAN

• 2.4 GHz

• 5 GHz

Temperature

• Operating: 0˚C to 40˚C

• Storing: -20˚C to 65˚C

Humidity

• Operating: 10%~90% (non-condensing)

• Storing: 5%~95% (non-condensing)

Certiﬁcations

• FCC Class B

• CE

• IC

• C-Tick

• CSA

• WiFi

Dimensions

• L = 198 mm

• W = 120 mm

• H = 32 mm

**Please note that operating frequency ranges vary depending on the regulations of individual countries and jurisdictions. The DAP-2553 isn’t supported in the 5.25~5.35 GHz and 5.47 ~ 5.725 GHz frequency

ranges in some regions.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share