D-Link DAP-1350 Router Manual PDF (Setup & Configuration Guide)

Page 126 / 139 Scroll up to view Page 121 - 125

1±³

D-Link DAP-1350 User Manual

Appendix A - Wireless Basics

Wireless Personal Area Network (WPAN)

Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range

up to 30 feet away.

Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use

nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops,

speakers, and other devices that operate on batteries.

Who uses wireless?

Wireless technology has become so popular in recent years that almost everyone is using it, whether it’s for home,

ofﬁce, business, D-Link has a wireless solution for it.

Home

• Gives everyone at home broadband access

• Surf the web, check email, instant message, etc.

• Gets rid of the cables around the house

• Simple and easy to use

Small Ofﬁce and Home Ofﬁce

• Stay on top of everything at home as you would at ofﬁce

• Remotely access your ofﬁce network from home

• Share Internet connection and printer with multiple computers

• No need to dedicate ofﬁce space

Page 127 / 139

1±´

D-Link DAP-1350 User Manual

Appendix A - Wireless Basics

Where is wireless used?

Wireless technology is expanding everywhere not just at home or ofﬁce. People like the freedom of mobility and it’s

becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless

connection in public places is usually called “hotspots”.

Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote

locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.

Wireless network is easy to setup, but if you’re installing it for the ﬁrst time it could be quite a task not knowing where to

start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless

network.

Tips

Here are a few things to keep in mind, when you install a wireless network.

Centralize your access point or Access Point

Make sure you place the bridge/access point in a centralized location within your network for the best performance. Try

to place the bridge/access point as high as possible in the room, so the signal gets dispersed throughout your home.

If you have a two-story home, you may need a repeater to boost the signal to extend the range.

Eliminate Interference

Place home appliances such as cordless telephones, microwaves, wireless speakers, and televisions as far away as

possible from the bridge/access point. This would signiﬁcantly reduce any interference that the appliances might cause

since they operate on same frequency.

Page 128 / 139

1±µ

D-Link DAP-1350 User Manual

Appendix A - Wireless Basics

Security

Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by

turning on the WPA or WEP security feature on the access point. Refer to product manual for detail information on how

to set it up.

There are basically two modes of networking:

• Infrastructure –

All wireless clients will connect to an access point or wireless bridge.

• Ad-Hoc –

Directly connecting to another computer, for peer-to-peer communication, using wireless

network adapters on each computer, such as two or more wireless network Cardbus adapters.

An Infrastructure network contains an Access Point or wireless bridge. All the wireless devices, or clients, will connect

to the wireless bridge or access point.

An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in

Ad-Hoc mode to communicate.

Wireless Modes

Page 129 / 139

1±¶

D-Link DAP-1350 User Manual

Appendix B - Networking Basics

Networking Basics

Check your IP address

After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a

DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

Click on

Start

>

Run

. In the run box type

cmd

and click

OK.

(Windows Vista

®

users type

cmd

in the

Start Search

box.)

At the prompt, type

ipconﬁg

and press

Enter.

This will display the IP address, subnet mask, and

the default gateway of your adapter.

If the address is 0.0.0.0, check your adapter

installation, security settings, and the settings

on your access point. Some firewall software

programs may block a DHCP request on newly

installed adapters.

If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee

or administrator to verify their wireless network settings.

Page 130 / 139

130

D-Link DAP-1350 User Manual

Appendix B - Networking Basics

Statically Assign an IP address

If you are not using a DHCP capable gateway/access point, or you need to assign a static IP address, please follow

the steps below:

Step 1

Windows Vista

®

-

Click on

Start

>

Control Panel

>

Network and Internet

>

Network and Sharing Center

>

Manage

Network Connections.

Windows

®

XP -

Click on

Start

>

Control Panel

>

Network Connections

.

Windows

®

2000 -

From the desktop, right-click

My Network Places

>

Properties

.

Step 2

Right-click on the

Local Area Connection

which represents your D-Link network adapter and select

Properties

.

Step 3

Highlight

Internet Protocol (TCP/IP)

and click

Properties

.

Step 4

Click

Use the following IP address

and enter an IP address that is on the same

subnet as your network or the LAN IP address on your router.

Example:

If the router´s LAN IP address is 192.168.0.1, make your IP address

192.168.0.X where X is a number between 2 and 99. Make sure that the number

you choose is not in use on the network. Set Default Gateway the same as the LAN

IP address of your router (192.168.0.1).

Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The

Secondary DNS is not needed or you may enter a DNS server from your ISP.

Step 5

Click

OK

twice to save your settings.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share