Page 101 / 115
Scroll up to view Page 96 - 100
DG-BR4000N/E User Manual
101
11-3 Backup Settings
Choose
System Tools > Backup Settings
and the Backup Settings page appears.
In this page, you can export the configuration information of the router in a file to the
computer for later use, import a previously saved or a new configuration file, restore the
factory default settings of the router, and reboot the router.
•
Backup
Click Backup and select the path to save the configuration of the router as a local file.
•
Restore
Click Choose file to select the configuration file in your computer and click Restore
to load the selected file to the router.
•
Erase
Click Erase to restore the factory default settings of the router. This action has the
same effect of pressing the Reset button on the rear panel till the router reboots.
•
Reboot
Click Reboot to reboot the router.
Page 102 / 115
DG-BR4000N/E User Manual
102
Caution:
After a new configuration file is imported, the original configuration
information of the router is lost. Hence, it is recommended to back up the
configuration before importing a new configuration file. If the new
configuration file is incorrect, you can import the previous backup file.
When the configuration file is loading, do not power off the router.
Otherwise, the router may be damaged and fail to work.
11-4 Set Password
Choose
System Tools > Set Password
and the Set Password page appears.
In this page, you can change the password of the administrator and set the time of page
timeout.
Page 103 / 115
DG-BR4000N/E User Manual
103
The following table describes parameters in this page:
Item
Description
Old Password
Enter the password for logging in to the router.
Set Password
Enter a new password.
Repeat New Password
Enter the new password again.
Web Idle Time Out
Settings
Set the time of page timeout. Its value range is 5 to 30 minutes. If
you do not operate on a page for a period longer than the set time
after login, the system switches to the login page when you try
performing the next operation on a page.
Note: For security measures, it is strongly recommended to change the default
user name and password of the administrator. If you forget the password, you
can restore the router to the default settings. The default user name and
password are admin and 1234 respectively.
Page 104 / 115
DG-BR4000N/E User Manual
104
11-5 Router Upgrade
Choose
System Tools > Router Upgrade
and the Router Upgrade page appears.
In this page, you can upgrade the software of the router in the following steps:
Step 1
Click Choose File to navigate to the latest software.
Step 2
Select the correct upgrade file. If you select Clear Config, the router restores to
the default settings after upgrade. If you do not select it, the current settings
remain.
Step 3
Click Upload to start upgrading.
After the upgrade is complete, the router automatically reboots.
Caution:
To avoid losing previous configuration of the router, save the configuration
before upgrade.
During upgrade, do not power off the router or press the Reset button.
Page 105 / 115
DG-BR4000N/E User Manual
105
12. Logout
The Logout control is in the lower right of the navigation bar. See the following figure:
The logout function is used to log out the current login status. After logout, you need to log
in again before accessing the configuration page of the router
To log out the router, do as follows:
Step 1
Click Logout under the System Tools menu and the following dialog box
appear:
Step 2
Click OK to log out. See the following figure. To return to the configuration
page, click Cancel.
19216811.live