DG-BR4000N/E User Manual
58
The following table describes parameters in this page:
Item
Description
Region
Select the region where you are in from the drop-down list.
Enable SSID
Broadcast
Enable or disable SSID broadcast. If it is enabled, the router
broadcasts its SSID in the wireless network. In this way, wireless
clients can find the SSID after scanning and hence join the
corresponding wireless network.
Enable Wireless
Isolation
Enable or disable wireless isolation. If it is selected, wireless
clients that use this SSID can access the Internet, but cannot
communicate with other wireless clients, Ethernet clients, or other
devices.
Name (SSID)
Network name. The SSID can contain up to 32 characters and can
be letters, numerals, hyphens and any combinations of them. The
SSID is case-sensitive.
Mode
Select the appropriate wireless mode. The default is Mixed
802.11b/g/n.
•
802.11b only: The maximum rate is 11 Mbps.
•
802.11g only: The maximum rate is 54 Mbps.
•
802.11n only: For 20M bandwidth, the maximum rate is 72
Mbps (In short preamble); for 40M bandwidth, the maximum
rate is 150 Mbps (In short preamble). You can select Long
preamble or Short Preamble in the Wireless Advanced Settings
page. For details, refer to section advanced wireless settings
•
Mixed 802.11b/g: It is compatible with 802.11b and 802.11g.
•
Mixed 802.11n/g: It is compatible with 802.11n and 802.11g.
•
Mixed 802.11b/g/n: It is compatible with 802.11b, 802.11n
and 802.11g.
Channel
Select the working channel of the wireless network. The default is
Auto, which indicates that the wireless router automatically
searches for the best channel in the available channels.
19216811.live