DG-BG4300N User Manual

Fields in this page:

ACS Field

Description

URL

ACS URL. For example,

User Name

The username the DSL device should use when connecting to the ACS.

Password

The password the DSL device should use when connecting to the ACS.

Periodic Inform Enable

When this field is enabled, the DSL device will send an Inform RPC to the ACS

server at the system startup, and will continue to send it periodically at an

interval defined in Periodic Inform Interval field; When this field is disabled, the

DSL device will only send Inform RPC to the ACS server once at the system

startup.

Periodic Inform Interval

Time interval in second to send Inform RPC.

Connection Request Field

Description

User Name

The username the remote ACS should use when connecting to this device.

Password

The password the remote ACS should use when connecting to this device.

DG-BG4300N User Manual

Path

The path of the device ConnectionRequestURL. The device

ConnectionRequestURL should be configured based on the Device_IP, Path

and Port as follows: http://Device_IP:Port/Path

Port

The port of the device ConnectionRequestURL.

6.5 Port Mapping Setup

The DSL device provides multiple interface groups. Up to five interface groups are supported

including one default group. The LAN and WAN interfaces could be included. Traffic coming from

one interface of a group can only be flowed to the interfaces in the same interface group. Thus, the

DG-BG4300N User Manual

DSL device can isolate traffic from group to group for some application. By default, all the

interfaces (LAN and WAN) belong to the default group, and the other four groups are all empty. It is

possible to assign any interface to any group but only one group.

6.5.1 Port Mapping Configuration

Fields in this page:

Field

Description

Enabled/Disabled

Radio buttons to enable/disable the interface group feature. If disabled, all

interfaces belong to the default group.

DG-BG4300N User Manual

“Interface groups

To manipulate a mapping group:



Select a group from the table.



Select interfaces from the available/grouped interface list and add it to the

grouped/available interface list using the arrow buttons to manipulate the

required mapping of the ports.



Click “Apply Changes” button to save the changes.

6.6 Others

6.6.1 Bridge Setting

You can enable/disable Spanning Tree Protocol and set MAC address aging time in this page.

Fields in this page:

Field

Description

DG-BG4300N User Manual

Ageing Time

Set the Ethernet address ageing time, in seconds. After [Ageing Time] seconds of

not having seen a frame coming from a certain address, the bridge will time out

(delete) that address from Forwarding DataBase (fdb).

802.1d Spanning Tree

Enable/disable the spanning tree protocol

6.6.2 Client Limit Configuration

This page is used to configure the capability of force how many devices can access to Internet!